Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

CET/Stuart Batty

Posts

CET/Stuart Batty

#1

CET/Stuart Batty

CJ

>As I've done for the last couple of months, I just visited the CryoSteel Web page to see if they are listing any new info about their tools in regards to distributers and the like. For the first time I no longer see a link to Stuart Batty's web site and when I visited Stu's site I noticed that their is no longer mention of his involvement with CET. Anyone know what's going on? Is Stuart still with the company? When will we be seeing their products in the stores and catalogs?

Re: CET/Stuart Batty

#2

Re: CET/Stuart Batty

Greg Haugen

>When I spoke with Stu a little while ago, he said the tools would be out in early fall, along with some chuck jaws he designed and the new Klein jig. From my understanding, after the tools were out his position will be on a consultation basis, initially his job was to design and develop the tools, not too much past that. Could be a wrong assumption though. I'm on our club's program committee and we'll be bringing Stu out to WI/MN May of '07.

Hope it helps,

Greg

Re: CET/Stuart Batty

#3

Re: CET/Stuart Batty

Russell L. Babbitt Jr.

>Latest info I hear was release of the tools about Christmas. Stuart will be demonstrating for us August 26. If I hear anything I will forward it.

Re: CET/Stuart Batty

#4

Re: CET/Stuart Batty

Chris Andrew

>There's a thread on the Woodturner's Resource message boards stating the Stuart has resigned from CET. No additional information is given.

Re: CET/Stuart Batty

#5

Re: CET/Stuart Batty

Russ Fairfield

>Is it just me, or does it seem strange that somebody buys an established name with a good reputation and market share, changes that name, eliminates all previous tools from their new product line, replaces them with a new technology (cryogenic) with questionable benefits, increases the prices, takes almost 2-years to do this, and it is still only a rumor that they will ever have tools to sell.

Re: CET/Stuart Batty

#6

Re: CET/Stuart Batty

CJ

>Very sad.

I actually found myself hesitating last night when I took the one Glaser tool I own, to the grinder. I thought about hanging it on the wall to be admired like the work of art it is, but it's the tool that I use every time I'm at the lathe. What to do, what to do?

Re: CET/Stuart Batty

#7

Re: CET/Stuart Batty

Barry Turner

>I bought a 5/8" V-15 Glaser Bowl Gouge off the CET display at the Symposium in Louisville. Its a very nice tool and I like it (all but the price of $159.95). How it compares with the older Glaser stuff, I can't say. This is my first one. I think it does have an edge over my Crown PM 5/8" bowl gouge, though.

Re: CET/Stuart Batty

#8

Re: CET/Stuart Batty

Wilford Bickel

>There seems to definitely be something up - the last email I sent to CET after the Louisville Symposium asking when the tools would be with retailers has gone unanswered. I talked to CraftUSA right before Louisville as I had been told by CET that they were going to be a distributor. I was told by CraftUSA that they had not even discussed being a distributor with CET. This is not sounding promising.

Re: CET/Stuart Batty

#9

Re: CET/Stuart Batty

Mkauder, Phenix City, AL

>while at AAW in Louisville, I bought about $1500 in Glaser/Batty/CryoSteel tools. The only thing that I did not take away with me was the 12" Oval Bowl Gouge, though I did get the handle. A couple of weeks later I emailed them and got an email From Paulo Martin, the CEO. He told me that after the Louisville show, the company had taken a weeks vacation, and would then be getting to the Louisville orders.

This morning, I got another email from Paulo, and he said that they had my name and address but were not sure which of the two Bowl Gouge lines I had ordered, and asked me, if I could find it, to fax him a copy of my sales receipt.

I am taking them at their word, and many of the items (all aready in production for a long time) that I was sent after Louisville took a couple of weeks to get here.

Mark

Re: CET/Stuart Batty

#10

Re: CET/Stuart Batty

Chris Wright

>Yes, it's true that Stu has resigned from CET as of a week or two ago. For legal reasons, he can't discuss details just that it was due to irreconcilable differences with CET management.

As for when the tools will be available again, no info there from any channel, it's anyone's guess...very sad.

Re: CET/Stuart Batty

#11

Two months after Glaser sold

Doug Thompson near Cleveland

>I emailed Paulo with a request to purchase (5)3/8" deep bowl gouge blades and (5)1/2" deep bowl gouge blades. Paulo did call and sounded very enthused about the new company. He would sell the blades but doubled the price... like I said to him for a extra 20 bucks I could buy the tool and the handle! Jerry would sell a 3/8 gouge for $32-35 and a 1/2 gouge for $45. I do own 9 Glaser handles and enough replacement blades to last a good while BUT what will I do when it's time to buy more replacement blade.

Up on soapbox...

After the phone call with Paulo I was in total disbelief that the price could jump that much. No question Glaser made the best tools on the market... now the price is too high.

Off soapbox... and what was done.

I'm a machinist so last December I started the process to make my own tools. A friend ground a cutter to my specifications, the steel was bought, milled, heat treated including the cryogenic treatment. Since Feb. the tools have been used by me and others with good results. In three weeks another batch will go to be heat treated then sent out to other turners to be evaluated.

Why did they stop production of Glaser tools in the first place?

Re: CET/Stuart Batty

#12

Re: Two months after Glaser sold

Mkauder, Phenix City, AL

>My understanding from Stuart was that he was hoping to leave the Glaser tools essentiall the same, except get them to make the flute profile more like a Sorby.

When I talked to one of the guys (not Paulo) I was told that CET was hoping the the Glasers (Red Handle) would the the mid-priced range, the Cryo-steel (Blue Handle) would the upper end, and that they hoped to have a lower/moderate priced line below the Glasers. As far I a knew from my discussions with them, the Glasers and the New Mini-G line would stay.

BTW, I would be very interested in seeing your tools when I demo at the OVWG symposium next October. I have a gouge from Sweazey - another small operation, that is my real go-to 1/2" Bowl Gouge. I hear that he is out with a 5/8" now, but have not confirmed it.

Mark

Re: CET/Stuart Batty

#13

Re: Two months after Glaser sold

Doug Thompson near Cleveland

>I'll have some tools at the Indy FallFest for people to see. It is fun to say how could I improve this tool then make it. Turning with that tool is priceless...

I do hope Stuart is OK, he did spend a year building this company.

Re: CET/Stuart Batty

#14

Re: CET/Stuart Batty *LINK*

CET

>Stuart Batty was a hired consultant for CET during the CryoSteel project. He has recently resigned his position with our company to pursue his career in instruction and demonstrations. Stuart is a phenomenal teacher, with the uncanny ability to convey proper woodturning techniques. We applaud and respect Stuart's decision. The community just regained a talented woodturning instructor.

CET and its Board Mermbers, wishes Stuart Batty good luck on his new endeavors. We appreciate the contributions he has made during his tenure.

In the meantime, CET is working diligently to address every single issue in regards to production. A task of this magnitude requires a lot of money, time and effort, since we are planning worldwide distribution. If we are taking extra time to place our tools in th market is because we believe that cautious steps and proper planning are mandatory to address large orders and create the proper distributions channels. We also believe that paying attention to these important details, will allow us to establish the proper manufacturing procedures which in turn will maximize the company's profits. That will give us the opportunity to pass to our customers better price structures.

Thanks for reading our posting.

CET Board of Directors!


http://www.cetinc.com

Re: CET/Stuart Batty

#15

Re: Two months after Glaser sold

CET

>Doug:

Production has not stopped. Production is being properly prepared in order to answer the large demand. We are trying to literally produce thousands of different tools. It takes time, money and effort.

Don't forget that CET has been commissioned by the AAW to produce over 1000 tools for their 20th anniversary. All of that parallell to the introduction show in Louisvillle, the launch of the new CryoSteel line (which by the way has a lot more than cryogenics to it) and glaser hitec and minig production.

Any company owner (such as yourself now) knows that proper planning is the key essential ingredient to success. There is a difference between producing few gouges and manufacturing over 10,000.

We are not worried about how long it takes. We will do it right.

CET

Good

Re: CET/Stuart Batty

#16

Re: Two months after Glaser sold

Doug Thompson near Cleveland

>Since you addressed this post to me I'll tell you exactly how I feel. No offence meant. I did buy 9 tools from Jerry and 11 replacement blades so I do beleive that Glaser made the best tools.

Jerry had a established business and the best product on the market yet those tools can't be found in any catalog. Where could we buy a Glaser tool today. Stores have been out of them for months. If you didn't stop production where are they going. Not to us!

I do understand that it takes time to manufacture a new product but this has been since last November.

When Jerry sold his tools the price was high but now it's too high for the average person. The cost of replacement blades is going to be what?

I have never sold any tools and this batch is only the second. Can a tool be improved... it sure can. Can it be made for less money... come to the midwest where wages are in line with most of the country. Business owner me... I have a very good job and family and don't need anything more.

BUT...

The one thing that bothers me is that the average person should be able to buy a good tool at a fair price.

This is how I feel and I don't mean to a smart a$$.

Doug

Re: CET/Stuart Batty

#17

Re: CET/Stuart Batty

Mkauder, Phenix City, AL

>Hi Gang,

Though Paulo Martin has already responded above, I am taking the liberty (without asking his permission) to post the text of an email a received today from Paulo. I think it says alot about what they are trying to do, make quality tools in quantity. I think we all know that Gerry's gouges could be hard to get at times.

Mark,

Your Cryo gouge will be shipped this coming week. You will be one of the few people who will have an opportunity to work with this tool, since it is not available anywhere else. I appreciate if you give us more feedback on performance.

Thanks for faxing the paperwork to us.

I also noticed your posting on woodcentral.

It is a prerogative of any company as you know to better assess their market and distribution channels. During the Jerry Glaser days, Jerry never stocked a large quantity of tools. We are working very hard to buy enough raw materials and then manufacture it in quantity to better supply the market. Things like this take time and money, especially when the Chinese have been buying ALL or MOST of our raw material.

CET is alive and well and we are striving to do it right (no matter what the rumors are).

Sincere Regards

Paulo Marin, ceo

You all need to know, that they - like most of the non-WC world, do not know me, or my turning. I did not get to pay for a nice new Cryosteel gouge because I am a "Name". I got it because I stood there and bought $1500 of their tool, and had the faith to wait until they produced it.

I am not a shill for them and will give a truthful report to you and CET when I get the gouge.

Mark

Re: CET/Stuart Batty

#18

CET - My LAST word on the subject 'til I get one

Mkauder, Phenix City, AL

>I got a call from Paulo Marin this morning, probably 6am his time. He had not seen anything posted today. We had a good conversation and he wanted me to know the straight scoop because I seemed to be one of those not attacking CET and many of you know me personally and would know that I am not serving Bull****.

He said that I could share most of what we talked about if I wanted to, but some information was given to me in strict confidence mostly to give me some background. I also heard from some other knowledgeable people via email.

CET is a company that produces parts for the Aerospace industry. Paulo has a 80,000sq ft. plant with 102 employees. When he was approached about producing turning tools, he thought it might be fun, if not profitable, to work with woodturners. He negotiated with Jerry Glaser for two years to take over production of his tools. Jerry agreed, and became a contracted consultant.

CET intends to produce several thousand of the tools a year, as well as the new lines. (I have heard that Jerry never made over 600 tools in one your (pretty good for a basically a one man operation) For instance - the mini-G set includes 13 tools, to get only 100 sets made and distributed to distributors, that is 1300 tools. He also has a signed contract with AAW to produce the AAW 25th Anniversary tools that must be filled. I beleave that that is large contract, and one usually fills "for sure" orders before stock for possible orders from distributers.

CET spent $120,000 for the booth at AAW and much more for tooling up for this venture. He will indeed be producing the negative rake scraper, but has to set his priorities, sell a few dozen NR Scrapers, or produce gouges.

He has negotiated prices for Crucible Steel that the is 30% lower than Jerry could get it for and will help to keep prices down as a result, but had to put up a huge line of credit to do that. I believe that Jerry had not raised his prices in the last 10 years, though dealers have.

I am just saying, that they are doing what they can, when they can. They are not messing with people, it is not their hobby, but they also have other things to do and somethings take time. They are not trying to treat the public like idiots, they ask the consumer not to act that way either - expecting things to appear like magic.

I go into Highland Hardware all the time and find that they are waiting on orders from Sorby, etc - the factory is on Holiday or something. What makes CET special that they should be held to a higher standard from companies that make their real money making cutlery?

I regularly go to computer/network trade show to see the debut of a new piece of software. They let me look at it, try it, and then tell me that will be released sometime 2-3 quarters away.

As a personal aside, I find it astounding that people will pay many hundred $$ for a hollowing rig that is not made of any special metal, made basically in someone's garage - finishing consists of sandblasting, and wait on delays because they are getting the "New Special so and so hollowing rig". Go figure.

If I Need something, I buy the best I can afford that is available at the time and live with it. If I WANT somthing, I am willing to wait until it is available. I always wanted a Glaser Bowl Gouge, but it was a want, but I also wanted a oval flute, so I did not buy one. Then when Stuart said he was going to try and Get Jerry to make some, I was willing to wait. When I got to Louisville, they had them, so I bought a couple. When I saw the Cryo line, I wanted one, knew they were not available and would wait. I wanted my name Laser engraved on the handle just like all the others I had purchased. They told that they did not know when they would be available for sure, nor what the final price would be - maybe as high as $250. I said fine, here is $250, I asked if I could get the handle now, and they could send me the gouge when it was available.

Patience is a virtue they say.

There - done - respond if you must, but I will not respond on this forum.

Good turning.

Mark

Re: CET/Stuart Batty

#19

Re: CET/Stuart Batty

Bob Elliott

>from the CET board of directors !: "The community just regained a talented woodturning instructor."

I was never under the illusion that we (the woodturning community) ever lost Stuart Batty as a talented woodturning instructor.