Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Working on tiny finials

Posts

Working on tiny finials

#1

Working on tiny finials

Carole Valentine

>This little holly and blackwood piece is 1 3/4"h x 1 3/8" wide (with finial) As you guys know, I have been having problems getting my finals in proportion on small pieces. Is this any better? It's trally hard to photograph these little things with my camera, even when set on macro. :(


img

Re: Working on tiny finials

#2

Re: Working on tiny finials

Bill Hale / Woodspinner

>Carol

That looks great to me.

I am no photographer but I find if I back off a little and use the telephoto I do better

Bill

Re: Working on tiny finials

#3

Re: Working on tiny finials

Ed Moore

>Carole,

I think your finial is exactly right for the piece. I wouldn't want it taller or shorter, and my reaction when I opened the picture was "Perfecto!"

Good job!

Ed

Re: Working on tiny finials

#4

Re: Working on tiny finials

John Lucas

>Well you did a pretty good job of photographing it. I would try to bounce some more light into the front. I think the finial goes nicely with this piece. You would tend to pick it up by the finial so I wouldn't make it too thin. The way the top and the neck is you want to grab it by that to pick the box up so functionally it works perfectly.

Re: Working on tiny finials

#5

Re: Working on tiny finials

Bill Stehman

>Carole,

Well done and a superb vessel which you seem to nail every time. The finial is proportioned perfectly. Maybe a softer edge to flow with the HF.... just a thought. I like it don't get me wrong. I liked your last one also.

bill

Re: Working on tiny finials

#6

Re: Working on tiny finials

Carole Valentine

>Bill, I chickened out! LOL I was afraid the edge would splinter and I really couldn't even see it very well. I suppose I could have use sandpaper? I tried to do a tiny little bead midway in, but was unable to see what I was doing. There is a better pic of it on my web site. I need some of those jewelers flip down things but I don't want to order them without trying them on.

Re: Working on tiny finials

#7

Re: Working on tiny finials

Bill Stehman

>Carole,

Once you nail finials you will be in a class of your own! I use a tiny parting tool and a 1/4" spindle gouge then sand paper wraper around small dowels or a tooth pick for coves and beads. Once they start flexing it is time to stop.... chuckle. Thank you so much for asking the question awhile back about gluing ebony to another piece for turning to get it away from the chuck. I tried it at the time and still no fialures, end grain to end grain, the savings in ebony is awesome. Keep up the excellent work. I'm going to try one of your minis right now... hehe.

Re: Working on tiny finials

#8

Re: Working on tiny finials

Ed Heuslein

>Howdy Carole: Beautiful. Period. I agree with Mr. Lucas, a little bounced light in front. I don't know how to do that however. I also don't know how to get that backlight like you do so well. Great job all around.

Re: Working on tiny finials

#9

Re: Working on tiny finials

Carole Valentine

>Thanks, ed. I took John's advice and tried moving the light a bit (bounce light? me? huh?) I also lost the coin per Joe Johnson's suggestion. Here is the new pic.


img

Re: Working on tiny finials

#10

Re: Working on tiny finials

Allen Neighbors

>Just plain AWESOME ! All the way around.

Allen

Re: Working on tiny finials

#11

Re: Working on tiny finials

Wayne Leach-NW Ontario

>The hollow form is extremely pleasing to the eye and the finial appears proportioned to match. Stunning in its simplicity, it would be ruined with any more detail in the finial. Simplisticly (is that a word) exquisite mini form!!!

Regards,

Wayne

Re: Working on tiny finials

#12

Re: Working on tiny finials

Danny Wells

>I think that is just right, just the right height and diameter. I don't think you could have gotten any better on that one. Nicely done.

Danny

Re: Working on tiny finials

#13

Re: Working on tiny finials

Stuart Johnson

>Carole, the thing I like so much about your turnings is the lack of visual size. You can't tell from the photo if the piece is 2 inches tall or 10 inches.

Re: Working on tiny finials

#14

Re: Working on tiny finials

Carole Valentine

>Thanks everyone.

Stuart, if what you say is the case, then I have accomplished my goal!