Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

What turning tools to start?

Posts

What turning tools to start?

#1

What turning tools to start?

Chicago Bob

>My girls gave me a Jet midi (14) lathe for my birthday last month.

What are the basic general utility tools I should start with and any experience with Penn State turning tools - they seem to be reasonablely priced and I am on somewhat of a budget.

Thanks so much for your help. Obiviously, I am new but excited about turning. Like to start with spindels and Christmas bobs.

Regards

Chicago Bob

(Formerly Tennessee Bob)

Re: What turning tools to start?

#2

Re: What turning tools to start?

TDaniel

>Harbor Freight has a good set of HSS tools for $39. This set and a 3/8 or 1/2" bowl gouge with a "U" shaped flute and a sharpening jig for the bowl gouge will get you going. A 3.5" chuck would also be nice to have.

TD

Re: What turning tools to start?

#3

Re: What turning tools to start?

Ron in Drums PA

>You know, I bought the HF tools just to practice sharpening. To my surprise, they turn out to be decent tools.

Re: What turning tools to start?

#4

Re: What turning tools to start?

Barry Irby

>I bought a set of Harbor Freight tools also. I paid $35 for them. I have not even used them and did not really need them, but for that price, I couldn't stand it. I have a number of other tools that individually cost two or three times that much. I did notice that they have two sets of tools and the other set was about $40, but I liked the looks of the cheaper set better.

I also saw a thread here the recently comparing various steels. Someone said they had several tools of several types of steel and they tried all of them in a side by side test and then admitted that their "Benjamin's Best" $20 Chinese chisel did the best. It beat out their high end expensive stuff.

So I think the message here is try the Harbor Freight or Benjamin's Best stuff until you think you have to have one of the "better" ones.

The Harbor Freight tools have short handles, but you could make your own and re-handle them.

Welcome to the round side. The ride has just begun. Now you need a grinder and sharpening jigs and on and on.

Re: What turning tools to start?

#5

Re: What turning tools to start? *LINK*

Phil Joines Krum, Tx.

>You'll probably also want a drill chuck. The one on the link one has a shorter shank that fits the Jet mini so you don't need to cut it down. Most of them are too long.

For small projects I recommend Bob Rosand's video Woodturning Projects. It's available from The American Assoc. of Woodturners.

http://www.woodturner.org/products/videos/

Earlier in the year they were giving a sharpening video for new or renewing membership. I don't know if they still are.

While on the AAW site check the local chapter list. If there's one in your area they are usually the best resource for new turners. A place to get some hands on instruction and most have good libraries.

Another good resource are the books by Dick Sing. he has 8 or 9 that cover a variety of small projects.


http://www.littlemachineshop.com/products/product_view.php?ProductID=1148

Re: What turning tools to start?

#6

Re: What turning tools to start?

Carole Valentine

>Ron, I would like to have one of those sets just to try different grinds but I have just come from the HF site and can't seem to find them no matter what search term I use. Do you happen to have an item number?

Re: What turning tools to start?

#7

Re: What turning tools to start?

Bill Hale / Woodspinner

>I agree with TD about the tools and a chuck.

Join AAW and a local chapter. You can get great help from others if you ask for help. Many turners will let you watch and some will offer some hands on. The chapters will have books and videos you can borrow and this alone will save more than the membership cost.

I set up my jet mini on a mechanics tool chest with drawers. It can be rolled out of the way when not in use and you can store all the tools etc in it. Buy the better one that has all drawers.

Welcome to the round side and tell your wife you will be in the shop.

Good turning and above all be safe

Bill in Dolores, Colorado

Re: What turning tools to start?

#8

Re: What turning tools to start?

Ron in Drums PA

>Talk about luck, A HF catolog came in today

47066-3HNH $35.99

Re: What turning tools to start?

#9

Re: What turning tools to start?

Merv Graham Richmond BC Can

>Happy tuning Bob and welcome to a fraternity that believes in helping out each other. Ditto on all of the above there is a lot of great info here. The most important of which is joining a turners guild in your area and hopefully they will be an AAW guild. This is the place to learn. As well as the above information a word of caution -- stay clear of tool stores; they are addictive and lead to the "have to have " syndrome most wood turners come down with. Happy turning and again welcome

Re: What turning tools to start?

#10

Re: What turning tools to start?

Lan Brady

>Bob,

I have bought and use both hss sets from HF. the $40 set is about 1/32" thicker steel than the $35 set. Both are good.

As you attend demo's and club meetings, the deomonstators and fellow turners will give you good tips on a new tool that you cannot live without. With both sets, I have been able to make most of the shapes mentioned in the demo. Some actually worked (for me)and I still use them. Others are just re-ground into the next latest and greatest shape.

The handles are a generic size. I steel wool the brand name off and add a coat of flat acrylic spray. Add a upholstery tack to the heal. I like them very well.

Only essential tool missing is the bowl gouge. I bought the 3/8" from sears for $20.

Good Luck, Lan

PS- Although you do not beleive it right now, you will buy bigger and better tools in the future!!!

Re: What turning tools to start?

#11

Thanks, Ron!

Carole Valentine

>

Re: What turning tools to start?

#12

Re: What turning tools to start?

Chicago Bob

>Thanks for all your great suggestions and pointers - I now look forward to getting addicted to turning, I don't think that it will take all that much! As long as I learn to turn Christmas ornaments, I think my wife will tolerate one more woodworking habit.

Ordered the HF turning tool set today and wait patiently for them to come. The price was certainly right.

Regards

Bob