Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Sanding Stick

Posts

Sanding Stick

#1

Sanding Stick

Jennifer@Indy.USA

>When I was in Louisville, one of the new gizmos I saw in the trade show was a thing that you stick inside hollowforms to sand the insides of it. It was a great device that looked substantial and would really do a good job. When I looked at the price however, I just about died. I believe it was over $100! Well Friday I was working on a little hollow piece with a relatively large opening so I was determined to get the inside sanded well, but my fingers only reached in about 2/3rds of the way. So I took a piece of dowel and cut it on the bandsaw trying to copy the inside shape of the form, and made a little do-dad to use as a finger extension. After cutting it rounded it over on the belt sander to smooth out any rough spots. I then used a piece of double sided tape and stuck my sandpaper right to it. It worked perfectly. I'm sure it's been done a million times over, but thought I'd post a picture for those, like me....that these little light bulbs take a while to blink on :)....it's scary, I know...but when I'm in my shop and these obviously simple things pop into my head....I feel like a genius!

Ha!

Thanks for looking,

Einstein :)



Re: Sanding Stick

#2

Re: Sanding Stick

Carole Valentine

>So many ways to skin a cat (so to speak). I made a stick with a foam ball covered in velcro strips. Then I bought a pair of slightly curved 12" locking forceps that I can fit into smaller openings. I just wrap a piece of sandpaper around a piece of foam block ( I use pieces of the fairly firm blocks that come with the micromesh sandpaper) lock the forceps on the whole works, shove it in there and have at it. Wally and many others advised me to NEVER put my fingers through the holes in the forceps handles. Definitely good advice! Still every once in while I will catch myself with a finger in one of those holes...I have to be really careful.

Re: Sanding Stick

#3

Re: Sanding Stick

Barry Irby

>Be more than careful. I tried this and the forceps spun in my hands and "captured" a finger on the way around and for a minute I thought it was broken. Ouch!!!!.

Re: Sanding Stick

#4

Re: Sanding Stick

Mike Brazeau

>Great work Jen. In my hurried hour at the AAW exhibits on Saturday morning, I picked up from The Sanding Glove some 1/4" thick foam bonded to Velcro loop and Amazing Goop adhesive for fastening to a holder. I knew I bought it for a reason! This will be the first use.

Mike

Re: Sanding Stick

#5

PS, Why not power sand?

Barry Irby

>You can buy the Extenda sand thing or you can buy 1" sanding disks or smaller with the hex shaft that have the little snap or quick connector cove on them and then buy a drill extension for the snap connector. You can easily get extensions six inches long (Lowes had them packaged with a coup;e of spade bits). Shouldn't be hard to find longer on ones or just snap two together.

Re: Sanding Stick

#6

Re: Sanding Stick

mike Nelson

>Jennifer, I swiped my wifes hot-glue gun and glued a short 1/2" hex head driver to the inside of a plastic water bottle cap, then glued 1/4" X 1 1/2" circle of dense foam to the top of the cap and stuck self stick velcro to the foam. I snapped this invention into my angle drill, works great for bowls and openings like your vase. Also use it with extension to get bottoms of deep vases. you can cut the foam the size you want. Hot glue comes in various strengths and is ready to use almost immediatly. Mike

Re: Sanding Stick

#7

Re: Sanding Stick

john lucas

>Jennifer Whatever you use, be careful. When you touch the sides of the vessel it want's to grap the paper. If you have extended the reach very far it becomes increasingly easy to pull what you have in your hand in a very quick circle and blows the side out of a piece. Trust me this happens really quickly.

I used to use a 12" extension on my drill with a homemade ball on the end. I would put sandpaper on this. I used a metal pipe around the shank of the extension so that I could grip it with my left hand while driving the drill with my right. It almost broke my left wrist and of course blew the side out of the piece and bent the drill extension.

I think the problems was mostly the speed of the workpiece. I should have slowed it down really slow and let the rotating sandpaper do the work. My lathe would only slow to 500 rpm back in those days and this was a fairly large piece so it had a lot of surface speed.

Now I usually use whatever stick I have handy and I'll spray some 3m super 77 spray adhesive on the stick and wrap on some sanpaper. One of these days I'll make something more permanent but this has gotten me through.

Re: Sanding Stick

#8

Re: Sanding Stick

gtwilkins

>Jennifer, I never stick my fingers into a small pot any longer, ever, after getting hung up at a relativeely slow speed, I now use a flapper wheel to sand inside pots and vases, I have four with different papers to make it easier. Trevor

Re: Sanding Stick

#9

These work really well and are on sale  *LINK*

Dave Smith, Longview, WA

>


Klingspor Adhesive Rolls Sale

Re: Sanding Stick

#10

Dick Hines

Re: PS, Why not power sand?

Dick Hines

>Klingspor has the flap sanding wheels in 1" size. The work well. Or you can make your own hollow form sanding thingie. Take a small sanding with hook and loop on the bottom. If it has stright sides you are in. If not use a sander and sand them stright. Then with contact cement glue H&L around the disk. Put a disk that is larger than the disk holder. Cut at right angles at 4 places around the disk and then fold the flaps back so the ends do not catch in you piece. Put the disk holder in you drill and go to it.

Re: Sanding Stick

#11

Re: Sanding Stick

Don Evans

>Carol:

Take some electrical tape (or any good substitute) and tape several times around each finger opening. You can still work the handles without problem and you will not be able, on that forgetful moment, to put your fingers inside the hole.

It will also work for the problem Barry mentioned. I've had mine taped for several years now.

Don

Re: Sanding Stick

#12

Ric Taylor

Re: These work really well and are on sale

Ric Taylor

>Dave,

There's a bunch of items on the page. Which are you referring to?

Thanks,

Ric

Re: Sanding Stick

#13

I hate it when I do that.

Dave Smith, Longview, WA

>I forgot that Klingspor defaults to the home page when a page url is used. My apologies.

I was refering to BARGAIN BOX OF ADHESIVE ROLLS - 5 LBS on sale for $10.

From their home page click Bargin Boxes on the left. Then select Bargin Boxes.

I have bought both the adheisive and kling-on bargin boxes. You can cut the kling-on into squares and use with your power sander. No need to cut them round.

Also the BARGAIN BOX OF END ROLLS 20# is great for lathe sanding.

Dave Smith

Slow learner in Longview, WA.