Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Help need starting capacitor Delta Midi

Posts

Help need starting capacitor Delta Midi

#1

Help need starting capacitor Delta Midi

David Sophusson, Custer Wa

>Hi All,

My grandson has been doing some turning on the lathe over the last few days and on Wed. night the starting capacitor let all the smoke out. Local motor shop said yeah we got some of the same value for 12 bucks. Sent Becky in yesterday to pick one up but the thing was huge, more than twice the size of the original and will no way fit under the cover on the motor. She went to another place and they said sorry none in stock but we can have one in about a week and a half. We spent a bunch of time last night googling but didn�t come up with much other than Delta wants 40 bucks plus shipping for the capacitor or 92 bucks for a whole new motor. It was too late to call Delta last night and I doubt that they could get me a new one here in time for the PNW BBQ. Anyone here got any ideas where I could get one sorta in a hurry? I really don�t want to tape a new one on the outside of the motor like the guy suggested to Becky yesterday the thing is about the size of a half stick of dynamite.....hmmmmm....naww....if it was Chico�s maybe. ;-)

Thanks.

Sophie

Re: Help need starting capacitor Delta Midi

#2

Re: Help need starting capacitor Delta Midi

Bill Hale / Woodspinner

>Try calling your local air conditioning repair places. Know the size in mfd and the measurements.

I am not sure but I think a little higher mfd will not hurt. Ask them.

Also try Radio Shack.

Bill Back in COOOL Colorado

Re: Help need starting capacitor Delta Midi

#3

Re: Help need starting capacitor Delta Midi

Ryan McMullen

>David,

See my response in the messages section for the full breif.

Check with Mouser Electronics - I got one from them for my motor, but it turned out the motor was shot anyways and I fried that capacitor as well. If I remember right the capacitor was less than $10.00.

Ryan

Re: Help need starting capacitor Delta Midi

#4

Re: Help need starting capacitor Delta Midi

Rick Allen

>You should be able to run the motor in either direction without the capacitor. Spin the hand wheel in the direction you want and turn on the power. If the motor doesn't run then you have something additional wrong. At least you can use the lathe while you wait for a proper fix.

Re: Help need starting capacitor Delta Midi

#5

Problem solved :-)

David Sophusson, Custer Wa

>Hi All,

Problem solved :-)

Becky called Delta this morning and the gal there told her that if there wasn�t a part number in the manual then you can�t get it, bye. Well thank you very much Delta!

Well lets just say that Becky has some other things going on for the past couple of weeks and she is starting to lose her patients with people that don�t have the right answers. You gotta remember that Becky is the sweetest gal you could ever want to meet...But she Was born and raised on a ranch in Wyoming and if provoked could easily embarrass a mule skinner. Well Becky got back on the phone to Delta and by the time she got off she had the number to the Jet service center down by Seattle.

So the very nice people at Jet said the part is in stock and it should be in our mail box on Monday. Although it cost almost three times as much as the one the guy wanted to sell her here in town at least it is a direct replacement and will fit back where it belongs like it�s supposed to.

So thanks everyone for the info, I�m going to file it away in case I ever need it again for something else.

Sophie

Re: Help need starting capacitor Delta Midi

#6

Thank Goodness!

Jennifer@Indy.USA

>I was worried that thing might come back in a bullet proof box wanting me to return it.

Wheeew!

Thank you JET!

;)

Re: Help need starting capacitor Delta Midi

#7

I still owe you big time for that!

David Sophusson, Custer Wa

>That was a lot of work you did for me and for a girl you sure build a mean shipping box!!! ;-)

Thanks! Sophie

Re: Help need starting capacitor Delta Midi

#8

Re: I still owe you big time for that!

Jennifer@Indy.USA

>Ha!

You owe me Nadda, Sophie :)

Re: Help need starting capacitor Delta Midi

#9

Jet Part number for Capacitor?

Devon Palmer

>Hey,

I maintain the mini lathes for the central ohio woodturners, and we invariabley lose at least 1 capacitor a year on average I guess on our 4-5 lathes, and I'd love to order a few frp, Jet if you have the part number.

- Devon Palmer, Columbus, Ohio