Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Can you name this Wood?

Posts

Can you name this Wood?

#1

Can you name this Wood?

Fred Holder

>Of course not! This chinese ball was made from blue machinable wax. It is a bit messy, but machines beautifully.


img

Re: Can you name this Wood?

#2

COOL ! Would be neat made outa

Ray Carson, New Jersey

>any other kind of REAL wood too.

Re: Can you name this Wood?

#3

Re: Can you name this Wood?

Dave Belser

>Fred,

I'm very interested in this machinable wax material, can you tell me more about it's properties and/or post a link on where to find it?

Thanks, Dave

Re: Can you name this Wood?

#4

Re: Can you name this Wood?

Fred Holder

>I purchased mine from MSC. Their web site is www.mscdirect.com. The stuff comes in blocks up to 24" x 24" x 2" and cylinders up to 5.88" x 18" long. You can turn very long shavings from this stuff. I think is it designed to test programs for computer controlled lathes and milling machines.

Re: Can you name this Wood?

#5

Re: COOL ! Would be neat made outa

Fred Holder

>I normally use real wood and have made well over 100 of these things. I use a great deal of different woods to make them. I would say that something like boxwood is probably best because of its fine close grain that holds detail very well. I recently started using the machineable wax to cast the plugs used during making the Chinese Ball. I turned so well that I decided to try making a Chinese Ball from it.

The Chinese ball in the attached photo was made in 2001 and is shown on a walnut stand. The wood for the ball was birch. The finish was gloss tung oil. This particular ball resides in Mr. Rockler's collection. It was one of the first Chinese Balls that I was able to make with all five balls that the Crown Chinese Ball Tools are capable of making.


img

Re: Can you name this Wood?

#6

Brad Vietje

Re: Can you name this Wood?

Brad Vietje

>Neat, Fred !

Is this the same stuff that jewelers use for casting metals ? I've turned some little tops out of the machinable wax used by jewelers, and some day I should see little silver spinning tops that result ...

Safe spinning,

Brad Vietje

Newbury, VT

encamped at Stellafane: www.stellafane.com