Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Cottonwood prep, pic maybe

Posts

Cottonwood prep, pic maybe

#1

Cottonwood prep, pic maybe

Mike Nelson

>I have access to a large, 3-4'dia cottonwood trunk 20' or so. Any ideas on how thick to cut the rounds(?) and then cut them up? Mainly I'm worried about it begining to crack right away. Will send pic of a piece turned but not hollowed. I Soaked it in sanding sealer.

Re: Cottonwood prep, pic maybe

#2

Re: Cottonwood prep, pic maybe

Mike Nelson

>If anyone knows how to get a pic from Canon ZoomBroswer EX to here, please let me know! thanks

Re: Cottonwood prep, pic maybe

#3

Re: Cottonwood prep, pic maybe

Barbara Gill, Remlik VA

>Cottonwood can have neat figure almost anywhere but around branches and forks is the best bet. I always cut mine on the sawmill. IMHO the figured cottonwood is best shown with platters. It is a challenging wood to turn. I will say that after the boards have been sawn and Anchorsealed the cracking is very minimal.

If there is a portable sawmill owner anywhere near you, that is the best bet. As I saw a log with turning wood in mind I get very creative with the use of my chainsaw and short cuts on the mill.

I am a little reluctant to tell you how I cut the logs into slabs with a chainsaw before cutting them into lengths if you have no mill. I have been using a chainsaw since '85 and I do not know how good you are with one.You can call me at home if you want. E-mail me for the number.

Re: Cottonwood prep, pic maybe

#4

Re: Cottonwood prep, pic maybe 

Mike Nelson

>


img

Re: Cottonwood prep, pic maybe

#5

Ric Taylor

I'll Show You How in my Driveway ...... :)

Ric Taylor

>