Catalpa
Sean Troy
>Hey all, how well does Catalpa turn, sand and finish? I have some Northeren Catalpa (big seed pods and large heart shaped leaves)Thank you, Sean
Knowledge You Can Build On — Est. 1998
Catalpa
Sean Troy
>Hey all, how well does Catalpa turn, sand and finish? I have some Northeren Catalpa (big seed pods and large heart shaped leaves)Thank you, Sean
Re: Catalpa
John Lucas
>Sean I turn a lot of dry catalpa. I love it. It turns easy but kind of looks like Ash when you get done. You do need to turn it smooth. If you try to sand with too course a grit you get really bad ridges from the summer/winter wood. I've only turned one green piece and I don't remember much about it. I don't think it was a problem or I would have remembered.
Re: Catalpa
Roger
>Sean,
The catalpa I've turned has turned well. Light as a feather,very soft,and it can have some beautiful grain pattern close to limbs and crotches, as well as some iridescence. Good luck.
Roger
Re: Catalpa
Bob Ballard
>I saw some beautiful bark edge bowls several years ago turned by Joe Ferola,Windsor Conn.I seem to remember Catalpa distorts very little when drying.
Re: Catalpa
RevDoug
>I have a friend up in IN that grabs all the catalpa he can get hold of. Won't share any of it either. He loves it. Pieces he's shown me had some nice color to them. Enjoy!
Turn 'em round,
Re: Catalpa
Joe Herrmann
>I've turned several bowls from it, mostly natural edged. Holds the bark well and sands and finishes great. The only complaint I had was the awful smell!
Joe
Re: Catalpa
Carole Valentine
>I have turned some caltalpa. As others have said it is very soft and you have to be careful with the sand paper. I would like to try sandblasting a piece if I ever get a compressor and a sandblasting cabinet. It can have some beautiful chatoyance. This is pic of the last piece I turned. That piece now lives in Hong Kong.
I like turning Catalpa
Leo Van Der Loo
>Sean like the other answers, it does not split easily when drying, or warp much, it has an oily smell not that bad IMO, It is a bit soft, but you can turn it well, no scraping, and keep your tools sharp also don't use course sandpaper, like John says the early/late wood will show badly and you also will tear the soft grain.
I like the color and it has some real shimmering grain at spots.
I have a picture of a bowl I turned, it has 2 crotches and also the piths and a knot and bark inclusion, it never split or warped, just a beauty.
Have fun and take care
Leo Van Der Loo
Re: Catalpa can be stunning *LINK*
Bill Turpin in WNC mountains
>Catalpa can have irridescent greens and blues in the middle of its coarse grain patterns. Go to the link and click on the Mountain Gallery, go to June 2005-Bob Heltman and July 2005-Jim Riggs. These two pieces came out of the same tree, which I provided.
Bob sanded his bowl to 220, and then burned the winter grain with a micro torch. He then shellaced the whole bowl to keep the soot from bleeding into the lighter summer grain. He then re-sanded and finished.
Jim turned the HF from a whole log section thru the end grain. Catalpa is also known as the East Indian Cigar Tree and the Fishing Worm Tree. In the south the trees get large green and black catapillars that make excellent bream/bluegill bait. Log sections will weather and crack on the ends, but usually only an inch deep.
Bill in WNC mountains
catalpa pics
Re: Catalpa: Not food safe, wear a dustmask....
Devon Palmer
>
Where did you get this information ????
Leo Van Der Loo
>I tried to find anything on that and only got some info on irritation from handling the flowers for some people, (study's were inconclusive) but found no warning for the wood or dust.
Hope it is no baseless scare mongering, we have to much of that already, but if true we can all benefit.
Have fun and take care
Leo Van Der Loo
Re: Where did you get this information ????
Devon Palmer
>Its more from experience and word of mouth. Let me clarify a little: While reference says its not poisonous to humans/animals, I have seen reference to alcohol soluble compounds that can irritate your stomach, and that the dust from it may carry these compounds and if inhaled, can upset your stomach through post nasal drip. Having experiencing that, along with several other woodturners in my area, I avoid it for food - makes GREAT boxes tho :)