Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

lacquer orange peel

Posts

lacquer orange peel

#1

lacquer orange peel

john lucas

>For those who followed this thread last week. I had massive orange peel problems with my lacquer spray. The weather here is 10 degrees cooler and now I'm getting a great finish. I didn't change a thing. I even used the same batch of mixed finish/thinner. I did clean the spray gun but I'm sure that isn't the problem. I just didn't want to leave it while I was on vacation. It's probably a little less humid as well but not much difference there. I think Russ was right when he said wait until it gets cooler.

Re: lacquer orange peel

#2

Re: lacquer orange peel

William Duffield, on the Cohansey

>I missed last week's thread, so if this has been mentioned, I'm sorry for being redundant. Next time, if you can't wait for cooler weather, switching to a smaller nozzle orifice should help.

Re: lacquer orange peel

#3

Re: lacquer orange peel

Darryl Hansen

>John I use the little "critter" spraygun . When I run into orange peel I just cut the pressure down to something below 40 psi. I had the same problem last week when you posted your comments. Now the heat has broken the problem has also gone away.

Re: lacquer orange peel

#4

Re: lacquer orange peel

John Lucas

>Daryl I'm using one of the cheap HF touch up guns. I run the pressure at about 30 PSI. I'll try a little higher and see what happens just for interest sake. This is my second one and it sprays a little different than the first one.