Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

New Jet mini lathe

Posts

New Jet mini lathe

#1

New Jet mini lathe

Brian

>Bought my first lathe - a Jet mini with the Jet stand. Assembled the stand and dropped the lathe on it only to find that the lathe has rubber pads on the bottom. Do folks knock out the feet somehow and then bolt the lathe to the stand? Thanks.

Re: New Jet mini lathe

#2

Re: New Jet mini lathe

William Duffield, on the Cohansey

>It's all too easy to knock the little rubberbabybuggybumpers out of the lathe bed. I found that out yesterday, when I showed up at Five Barns with only three feet on the lathe. To keep it from wobbling on my enhanced WorkMutt, I twisted another foot off. I don't see any need for the bumpers between the lathe and the stand. Also, I didn't notice any damage to the hard maple top of the WorkMutt due to the missing feet, but we only used it to turn bottle stoppers.

Re: New Jet mini lathe

#3

Re: New Jet mini lathe

john lucas

>The feet push out quite easily. I built my own stands but I found that it was more solid without the feet. John

Re: New Jet mini lathe

#4

Re: New Jet mini lathe Got it! NM

Brian

>

Re: New Jet mini lathe

#5

Re: New Jet mini lathe Got it! NM

don in central IL

>Is this a stealth gloat?