Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Cheap(er) wheels for a bowl steady tip

Posts

Cheap(er) wheels for a bowl steady tip

#1

Cheap(er) wheels for a bowl steady tip

Barry Irby

>I am trying to make a bowl steady. Just thought I would post a tip on how to get cheaper wheels. I tried buying Rollerblade wheels and bearings and found them to be pretty expensive. The wheels cam in sets of four and were $20 to $30. The bearings came in sets with enough to do eight wheels were $30 to $50. They may have been cheaper on line, but I'm old fashioned and wanted to go put my hands on them. Anyway, I went to a used sporting goods store and looked at them. While there I decided to look at used skates. Bought a pair of Nike's that apparently had very little use. $25 Such a deal! Eight wheels with bearings and I get the "axles" and the inserts that go into the frames. I am eyeballing the frames also. Might be able to cut them up and make supports for the wheels.

Locally, the store was called "Play It Again Sports". (Not affiliated, etc.) You might also try Goodwill, Etc.

Re: Cheap(er) wheels for a bowl steady tip

#2

Re: Cheap(er) wheels for a bowl steady tip

don in central IL

>I mentioned to my wife that if she ran across a pair of in line skates at a yard sale to pick them up. Last Saturday I received a pair of skates for $1. Now I have 8 wheels, axles, etc. and should have the bowl steady done this week end. Guess I'm just cheap, but I prefer frugal.

Re: Cheap(er) wheels for a bowl steady tip

#3

Yep Yard sales are the way to go

Carole Valentine

>Got some for a $1 as well

Re: Cheap(er) wheels for a bowl steady tip

#4

Leo Van Der Loo

Of course if youre lucky,

leo Van Der Loo

>you might run into a real deal, I happen to walk through a sporting goods dep. last year, and just glancing at the rollerblade wheels, I see a special, whoooooo, a set of high end wheels had only seven wheels in the sealed pack, going for $11.--, Gooooone to my shop. Now if I only can find the time to build my steady, yes someday I'm sure.

Have fun and take care

Leo Van Der Loo

Re: Cheap(er) wheels for a bowl steady tip

#5

Re: Cheap(er) wheels

William Duffield, on the Cohansey

>I found out the hard way that it's a really bad idea to skimp on wheels, and especially on bearings.


If you think this looks bad, you should have seen the skid marks on the mahogany bedpost.

After the big wreck in turn four, we replaced them with these, and have had no further problems.


Re: Cheap(er) wheels for a bowl steady tip

#6

Re: Cheap(er) wheels

Phil Joines Krum, Tx

>William,

What speed where you doing when they wiped out?

What are the second set? Do they come with road hazard coverage? :>)

Re: Cheap(er) wheels for a bowl steady tip

#7

Re: Cheap(er) wheels

William Duffield, on the Cohansey

>I think you might be able to find the answers in the Turning Archives. I don't remember the type of the new wheels, but they weren't from in-line skates. Also, I wasn't driving, or even "at the track" when the mishap occurred. I think I would have had enough experience to have shut it down and limped into the pits long before things got that bad. I built the steady rest, but a very inexperienced turner was "at the wheel" when the bearings overheated and froze up.

Re: Cheap(er) wheels for a bowl steady tip

#8

Re: *LINKS*

William Duffield, on the Cohansey

>Here are a couple of results of my Turning forum archive search of my original posts on these wheels:

Wheels

Steady Rest

If you search for ALL "duffield steady rest" you'll find more observations and photos.