Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

What a loooooong weekend!

Posts

What a loooooong weekend!

#1

What a loooooong weekend!

Charlie Anderson

>Some of you may have seen that I'm waiting the delivery of new Powermatic 3520. Well, it arrived Thursday. Estes Trucking insisted it deliver it using a 45 foot 18 wheeler. No way would that get down my driveway, so I arranged with a local garage to have Estes put it on their flatbed wrecker. It was then delivered to my house and the wrecker was able to set it down inside my garage. Very nice.

A friend who's helping me set it up came by to look how we would handle the weight. I forgot to mention I also borrowed a 2 ton engine lift from the garage. To be safe we want to use good slings so my friend was to check them out of his company's toolcrib.

He did that Friday and said I should let him know when I was ready. My shop was a mess and I had an 'order' from my wife for 4 bowls and 10 pens to take as 'thank you' gifts on her trip to Turkey nest week.

I finished those up and cleaned the shop. I did such a good job, even Mike Schwing might have approved. I converted one of my circuits to 220 and now I was ready it was only 2 pm Friday.

Got in touch with my friend and he said he'd check with his family to see what was happening and get back with me. I finally called him at 3 pm Sat to see what was happening. He said 'mid afternoon Sunday'.

So Mr Mustard sits unassembled in the garage. That's why it's been such a loooong weekend.

Re: What a loooooong weekend!

#2

Re: What a loooooong weekend!

john lucas

>Oh man that sucks. It will be worth the wait. I've been turning on mine all day. Hope to have some work done by the end of the weekend.

Re: What a loooooong weekend!

#3

Re: What a loooooong weekend!

Ed Karch

>I just got a commission for 9 bowls so my mustard monster has been busy today.

Re: What a loooooong weekend!

#4

Re: What a loooooong weekend!

Allen Neighbors

>The memories of having to wait will disappear the first time you turn.

Happy for you!

Allen

Re: What a loooooong weekend!

#5

She's up and running

Charlie Anderson

>The engine hoist was just the thing. Very little stress and strain. I should have taken a picture of that. It all set for some turning and that probably won't be too long from now.


img

Re: What a loooooong weekend!

#6

You better hurry ...

Bob Fawcett

>that shop is far too clean. :-)

Re: What a loooooong weekend!

#7

Re: She's up and running

Doug Thompson near Cleveland

>Sure does look nice sitting in the shop. Now get that thing dirty so it looks even better.

Just a few thoughts;

Clean and oil the clamp slide under the banjo... this is what causes the banjo not to slide well.

Use a carpenters level and make sure it's perfect then mark the location of the legs on the floor.

This lathe will turn 50-70lb blanks with no problem.

Why are you reading this when you could be turning on a brand new lathe... have fun!