Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Ash bowl

Posts

Ash bowl

#1

Ash bowl

Ed Kelle

>First project off my new Powermatic. You'd think I'd do something big now that I have the chance, but this is 6"D x 4"H, foot 1.75", slightly under but I like the look. About 1/8" thick, it is much easier to do on a smoothly running lathe. Amazng grain on this, I never expected it. Cleaned out the wormhole and left it, also left the hole thru the knothole. Finished with Watco and buffed. This is going to my friend who helped with the heavy lifting and assembly last week. It went down a filght of stairs, and I don't want to think of it coming back up.

I love having reverse and such low speed and power.


img

Re: Ash bowl

#2

Re: Ash bowl

Jennifer@Indy.USA

>Very Nice Ed. Some people detest turning ash but I really enjoy it. I love the ogee shape to this piece. I'm sure your buddy will be thrilled to have it. Congrats on the new acquisition!

Jen :)

Re: Ash bowl

#3

Re: Ash bowl

John Lucas

>Ed nice piece. I also like the wood. I'll bet that was fun. I find that I turn the same size or even smaller on a lot of pieces now that I have the bigger lathe. It just runs so smooth it's fun to turn whatever size. It is nice to have the option like the big platter I turned the other day. Did you notice how small all the turnings were at the AAW instant gallery. Many were much smaller than I had imagined. I remember having that impression one other time when I was at the Florida symposium. Everyone you talk to now has at least a 16" lathe and most of the big people have 20" and yet the vast majority of pieces could be turned on a mini lathe.

Re: Ash bowl

#4

Re: Ash bowl

Chris K in MD

>John,

I agree but I dont think its only the swing that people are looking for with these lathes. Its the features like True VS and the high tolerances and quality. IMO the lathes in the $300-$1500 range are not worth a hoot. I suggest to more and more people get the mini lathe do all you can with it and resist every urge to upgarde until you can buy something in the $1700+ range.

THe only mini lathe with comparable features is the Oneway and for that price you can get a bigger swing if you ever need it.

Re: Ash bowl

#5

Brad Vietje

Real Nice, Ed -- Congratulations !

Brad Vietje

>

Re: Ash bowl

#6

Re: Ash bowl

Gerry Meekins

>Ed,

Very nice bowl and it's going to a great cause. Nice to have some brawn on standby just in case you want to move it!

IMHO the best part of moving from the Delta to the 3520 is now I can hear music while I'm turning! It's great having a quiet lathe..

Gerry

P.S. I got the magnets for your remote switch today. Will send it out soon as I get them glued on.

Re: Ash bowl

#7

Thanks!

Ed Kelle

>My friend loved the bowl tonight.

As far as the IG goes, yes I also had no real concept of scale and was suprised that things I have seen online were not as large as I had imagined, even though sizes were posted. IN a way size really does not matter as much, there is tremendous work being done on mini's. Most of mine were on my mini. The nice thing about the PM is having a smooth running machine, with lots of power, a much lower speed on the low side, reverse, and even more stability than my mini. It definitely put the joy back into turning.

My 18" extension arrived today and I will mount it on the lower part of the legs. Of course since I am doing 6" bowls, I'll be able to use it as a seat while turning from the end! ha

Thanks for all the nice compliments!

Re: Ash bowl

#8

Re: Ash bowl

Jim Shaver Oakville, Ont.

>Way to go Ed,

Looks awesome and so classic!

Power and revere, does that help heal catches??!!

:-)

Take care,

Jim