Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Bill Grumbine, a couple of questions

Posts

Bill Grumbine, a couple of questions

#1

Bill Grumbine, a couple of questions

Terry Quiram, Roanoke Illinois

>Watched your new video twice and still not sure about the "push cut". I appears you are going in with the gouge straight up If that is the case how are riding the bevel? Does the gouge stay parallel with the ways all the way through the cut? What the heck size is that gouge you are using???

Thanks,Terry

Re: Bill Grumbine, a couple of questions

#2

Re: Bill Grumbine, a couple of questions

Bill Grumbine (Kutztown PA)

>Hi Terry

Sorry it looks a bit ambiguous. The bevel is rolled over to the right, somewhere between all the way and 45 deg, depending on where the sweet spot is. The handle is not quite parallel to the ways. That angle is going to be dependent on the bevel of the tool, but it pretty much stays the same throughout the cut, changing only as the curvature of the bowl changes. I am using a Oneway 1/2" bowl gouge with my own custom handle installed. If my explanation is still a little unclear, let me know and I will try to elaborate on it.

Bill

Re: Bill Grumbine, a couple of questions

#3

Re: Bill Grumbine, a couple of questions

Ken Grunke from SW WI

>If I may butt in here--Bill, I think this needs clarifying:

>The bevel is rolled over to the right

The flute is generally used as a reference for a gouge's axial position--is that what you meant instead of the bevel?

Re: Bill Grumbine, a couple of questions

#4

Re: Bill Grumbine, a couple of questions

Bill Grumbine (Kutztown PA)

>Thanks Ken, and you are right, I did mean flute. If we did not have this antique software, I would be able to edit my post. No blame on Ellis, just those who cry out with a vengeance every time the (software) issue is raised.

Bill

Re: Bill Grumbine, a couple of questions

#5

editing?

John Lucas

>Bill I must have a different program or something. I usually check my post for problems before I send it unless I'm rushing but I can easily hit preview message and check and edit my post before actually posting. I'm trying to see how many times I can say post in one sentence. :) I guess I assume that everyone has that option but this editing thing keeps coming up. Am I missing something?

Re: Bill Grumbine, a couple of questions

#6

Re: MIA

Mark Mandell - Gone Round In Jersey

>The ability to edit your own post AFTER you post it because a)you were rushed and didn't preview it, b)your dyslexia was acting up and you missed the fidderence, c)your keyborb was malfungshining, d)you missed the point entirely and posted something responsive to a question previously posted on a different forum, g)you've forgotten your alphabet, t) all or any combination of the above

|;-}}

ps: Way too expensive for Ellis to change!

Re: Bill Grumbine, a couple of questions

#7

Re: MIA

Don in Central Illinois

>And besides, it makes for some interesting reads.

Re: Bill Grumbine, a couple of questions

#8

Re: MIA

Ken Grunke from SW WI

>I thought it was possible to enable editing of posts if the admin desired, but now I see after perusing the software's online docs that one can only delete a post if the admin enables it. Probably a previous version made it possible.

Re: Bill Grumbine, a couple of questions

#9

Good xplantion. Mark!....

Eddie Pacheco, San Jose, Ca.

>

Re: Bill Grumbine, a couple of questions

#10

Thanks Bill

Terry Quiram, Roanoke Illinois

>I will let you know whether or not I understand after I try it again.

Terry