Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Signing a dark wood piece

Posts

Signing a dark wood piece

#1

Signing a dark wood piece

Jorge Castaneda ~ Downeast Maine

>Hello,

I am finishing a nice walnut bowl and while the finish dries I got out the Optima and practiced my lettering in a scrap piece. Although the burn is rather deep, it is hard to read, it just blends with the background.

What dod you people do in a case like this? I would like to make it stand out.

TIA

Jorge

Re: Signing a dark wood piece

#2

Re: Signing a dark wood piece

Albertbob

>Most art stores sell gold and silver pigmented pens that are ideal for this type of marking.Either carved in you name and fill it with the color or just write it on and spray a bit of lacquer on top.

Bob

Re: Signing a dark wood piece

#3

Re: Signing a dark wood piece

John Lucas

>Jorge I couldn't find a gold or silver pen that wrote fine enough for me. I use a dremel engraver and most of the time leave it natural. You can rub gold or silver wax into the engraving which really makes it pop. If your woodburning is deep enough you might be able to do the same thing. I use a product called rub-n-buff but there are a lot of other colored waxes on the market.

Re: Signing a dark wood piece

#4

Re: Signing a dark wood piece

Wally Dickerman in Arizona

>John, when you use Rub-n-buff on a piece, what do you use as a top coat? I've used Krylon Crystal Clear acrilic. but I don't get much of a shine from it.

Wally

Re: Signing a dark wood piece

#5

Re: Signing a dark wood piece

Jorge Castaneda ~ Downeast Maine

>thanks Bob,

Iwill give it a try.

Jorge

Re: Signing a dark wood piece

#6

Re: Signing a dark wood piece

Jorge Castaneda ~ Downeast Maine

>Sounds like a good way to go, will varnish coat that wax?

Right now I am finishing my bowls with General Finishes Bowl finish.

Thanks

Jorge

Re: Signing a dark wood piece

#7

Re: Signing a dark wood piece

John Lucas

>The last one I did like this I used lacquer as both the base coat and top coat. Sometimes I will use shellac as either the final finish or as a seal coat. I really haven't played with this very much because I like the plain unstated look of just the engraver on my handmirrors. I use it mostly on my hollow vessels which I seldom do anymore and then they are usually light woods and don't need the wax.

Re: Signing a dark wood piece

#8

Re: Signing a dark wood piece

Longhair

>I have had very good luck with the Sharpie Silver pens. They write a very clear bold silver line that seems like paint, but a lot finer/cleaner than a brush could do.

Re: Signing a dark wood piece

#9

Thanks!

Jorge Castaneda ~ Downeast Maine

>

Re: Signing a dark wood piece

#10

Re: Signing a dark wood piece

Barbara Gill, Remlik VA

>I found out that the finish I use dissolves the silver/gold marker ink right off the piece.

Re: Signing a dark wood piece

#11

Hmmm,

Jorge Castaneda ~ Downeast Maine

>Thanks Barbara,good to know,

maybe I will try a fine dust of a light color mixed with epoxy.

Jorge

Re: Signing a dark wood piece

#12

Re: Hmmm,

John Lucas

>the same is true for several different pens I've tried and depends on the finish you use. I would definitely test it before going to the final piece.

Re: Signing a dark wood piece

#13

Try a gel pen

Charlie Anderson

>I learned this from Dave Smith.

Sign before you finish the piece.

Now I've only tried black but gel pens are available in gold, white and silver.

Re: Signing a dark wood piece

#14

Thanks

Jorge Castaneda ~ Downeast Maine

>