Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

What's the Price of Eggs... ???

Posts

What's the Price of Eggs... ???

#1

What's the Price of Eggs... ???

Allen Neighbors

>Nope. Not in China. Just in Texas. :o)

I've been having a blast, just turning wooden eggs. I have a lot of cutoffs, and other small chunks of wood, and have turned a bunch of eggs. I don't apply any finish except sanding to brown paper and buffing. People love these things, and ask me how much they go for. I don't know what to tell them. I've given some of them away. I just have a lot of fun turning them.

I've decided that I would turn an egg from every different kind of wood I have... but so far haven't run out of wood yet. What would be a good price to ask for eggs... by the dozen or single? (Why would anyone want a single egg?)

Just curious.

Allen

Re: What's the Price of Eggs... ???

#2

Price of Eggs...$1.25 a doz fr. me nieghbor NM

D Putland

>

Re: What's the Price of Eggs... ???

#3

Re: What's the Price of Eggs... ???

Ed Heuslein

>Howdy Allen: Actually many people collect eggs. Last year I sold a "Bakers Dozen", 13 eggs, all different woods, in a bowl to a collector. I sell mine for 2 to 7 bucks each, depending on the wood. Local woods are cheaper than the exotics. But, I've also been known to give them away too - especially to kids. And I always try to have some at my booth to hand to women to "just feel." Wood needs to be felt. And it keeps them at your booth for a while with nothing to do but feel and look. You can't sell if the people don't look. Good luck.

Re: What's the Price of Eggs... ???

#4

Re: What's the Price of Eggs... ???

Bob Fawcett

>Allen,

I don't know the price of eggs, but I do know the excitement of a new lathe. Enjoy yourself and the OneWay. Who cares what the price of eggs is? Just do what feels right. If they don't want to pay, give them to the kids.

Re: What's the Price of Eggs... ???

#5

Steven Antonucci

Whatever you want for them...

steve antonucci

>assuming the material is "free" (locally grown, cutoffs, etc.) it becomes a question of what do you want to get out of it?

I turn balls and such, and they're just "fun" for me since, I know I need 20 minutes to do them right and they cost at least a $1 to make (sanding, finish, etc..).

I'd price them higher than you are will to sell for, and "make a deal" for buyers. Pier One sells balls to put in a bowl for $7 and up...

Steve

Re: What's the Price of Eggs... ???

#6

Re: Whatever you want for them...

Allen Neighbors

>Thanks, Steve, all the wood is free, just takes a little time and a little finish. Spent all day, though, just puttering around, making egg chucks... some wood was too dry, and the tines broke, other wood had stress cracks in it and broke. Just having a blast doing these, though.

I've never tried a sphere, but it seems like it might be fun.

Re: What's the Price of Eggs... ???

#7

Re: Whatever you want for them...

Bob Elliott

>Allen,

Tried sending this to your e-mail address but it was not valid. Here are a few pictures of an egg chuck of PVC made by Hal Simmons from the Atlanta area.


img

Re: What's the Price of Eggs... ???

#8

Re: Whatever you want for them...

HarryB

>We have a guy in our club, Lehigh Valley Woodturners, who turns spheres out of every wood he can find. Occasionally he brings part of his collection to 'Show and Tell' at our meetings. I think he is well over seventy species of wood. A fun part of the hobby.

Harry

Re: What's the Price of Eggs... ???

#9

egg chuck side view

Bob Elliott

>The hose clamp goes in the groove to the left. Your chuck with 50mm jaws grabs the tenon on the right.


img

Re: What's the Price of Eggs... ???

#10

Re: egg chuck side view

William Duffield, on the Cohansey

>Why didn't he put the stress relief holes at the bottom of every slot? The ones I've seen were done with lots of holes, and the guys who made them strongly suggested that they were necessary to keep the chuck from cracking.

Re: What's the Price of Eggs... ???

#11

Re: egg chuck side view

Allen Neighbors

>Bob, I really appreciate your posting these pics. I've been wanting to make a couple out of PVC, and your photos make me as questions.

Did you glue one pipe inside another to get that thickness?

When you turned the tenon/spigot on the butt end of it, did you just chuck the other end in the chuck?

Is the large hole in the side for removing the egg? or stress relief?

Thanks again,

Allen

Re: What's the Price of Eggs... ???

#12

Re: egg chuck side view

Bob Elliott

>Allen,

I had to look at mine to get the answers. The pictures I posted are of Hal's chuck a few years ago at Southern States Symposium.

The chuck uses two hose clamps, one in the position you see and the other in the empty groove.

The thickness is made by 1 1/2" PVC glued into both ends of a coupler/union. I believe it's schedule 40 PVC. The wall thickness of the PVC is about 1/8".

If I remember correctly, I think I did chuck the other end in the chuck when I turned the tenon/spigot on the butt end of it. Although, I may have jam chucked it (that would probably result in a truer chuck). Also on my tenon, I only brought the thickness of the union/coupler down to about half. I could have gone farther since it's thick there with the insert of the PVC.

The other thing you have to do is to true up the coupler/union and the PVC pieces before assembly. The coupler is rough on the ends with evidence that it was in a mold. Scraping works real well for PVC. Makes a real mess too.

To dig the grooves for the hose clamps, I used a small bedan. Do this before cutting the slots (much safer).

I made mine without the holes on the side, just the hand sawed slots. I think the holes technique is only required when you have to deal with wood grain with the chance of spliting that grain.