Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

New lathe back online...

Posts

New lathe back online...

#1

New lathe back online...

Peter Teubel

>I received my replacement spindle for my 2436 today. Took all of 5 minutes to replace it. Six cap screws, a tap with a rubber mallet, and out it popped.

Works fine now...VERY quiet. Here's a couple pics of the old spindle. Again, this lathe has been sitting unused in my (unheated) shop for over a year. It looks like condensation got the better of it. Well, it won't be a problem anymore. 1) I intend to USE it now and 2) the shop now has heat for the winter!



Re: New lathe back online...

#2

Re: Peter, I forgot

Allen Neighbors

>what you said your trouble was with the old spindle. I see the rust in the pic, but did it affect the bearings?

BTW, I'm glad for you... that you got it working again... Enjoy it!

TIA

Allen

Re: New lathe back online...

#3

I Wonder.............

Barry Turner

>I wonder if the Queen Elizbeth II is missing a drive shaft? What a spindle!

Re: New lathe back online...

#4

Spindle getting hot...

Peter Teubel

>...as in "2nd degree burn if you touch it" hot within 5 minutes. Plus it was making quite a bit of noise. The rust in the pic is on the rear index wheel area, but it was the massive front bearing that was causing the heat. No rust on the front that I could see, but my guess would be that it was inside and causing friction.