Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

a little help/info about finishing cocobolo

Posts

a little help/info about finishing cocobolo

#1

a little help/info about finishing cocobolo

Gordon P in Sumner, WA

>I am making some cocobolo pens and have reached the point where I am ready [i think] to apply the finish.

first, let me bring you up to this point:

1. Pen is turned and sanded to 4000 grit

2. after sanding, I used some of the turning waste to "polish" the pen blank. At this point, it has a lovely satiny lustre and looks like it is done. no finish has been applied.

So, here are my questions:

1. Am i safe if i do not apply a finish to the pen??

2. what is the preferred or recommended finish for cocobolo??

3. any secrets I should know before I apply it??

Re: a little help/info about finishing cocobolo

#2

Ric Taylor

Re: a little help/info about finishing cocobolo

Ric Taylor

>Gordon,

If your pens are for gifts or for sale, the safe thing to do is put a finish on them. Some people have sensitivities to cocobolo, and a finish will help to insulate their skin from the wood.

When turning or sanding cocobolo, you should be careful to avoid breathing the dust.

Ric

Re: a little help/info about finishing cocobolo

#3

Re: a little help/info about finishing cocobolo

eaglesc

>I have in the past had problems applying a CA finish to cocobolo as it is an oily wood.

Some recomend wiping with alcohol prior to finishing.

Whatever you do decide I suggest you try your finish choice on a scrap piece(turned and sanded to the same grit you are at)before you finish the pieces you have now.

If it weren't for the possible reaction to cocobolo I would just wax with carnauba and let it go at that.

I have not had a reaction to cocobolo and really enjoy the "feel" of a natural wood pen.

That is not always what a customer prefers though.

ANother option would be to leave them as they are and use a product called TSW.

It is a topcoat with carnauba wax and polyners in in it.

It will make the pen shine with a natural luster as you have described.

Periodic reapllications will clean and shine it after buffing.

I don't know if it will "seal" in the properties that some people are allergic to.

Hopefully Russ will add to this.

If he does disregard my remarks. ;>)

Re: a little help/info about finishing cocobolo

#4

Re: a little help/info about finishing cocobolo

Allen Neighbors

>Along about March this year I made a small hollowform from Cocobolo. With the lathe turning slowly, I applied a finish of approximately 35%Lacquer/65%Thinner. Let it set for a half minute or so, and then speeded up the lathe and polished with soft old t-shirt. After finishing the bottom I buffed it. It hasn't changed any since.

Allen