Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Not exactly a Design question, but......?

Posts

Not exactly a Design question, but......?

#1

Not exactly a Design question, but......?

Barry Irby

>Has anybody else noticed that the bowl or HF or lidded vessel gets bigger as you carry it out to the shop and into the house. That wonderfully delicate thing in the shop grows to something you could crush walnuts with during the trip into the house. I have made lidded vessels that appear cute in the shop and get them home and they look like you could store bulk dry goods in them. That great bowl in the shop looks big enough to feed a team of horses in the house. Is it just me?

Re: Not exactly a Design question, but......?

#2

Re: Not exactly a Design question, but......?

Stuart Johnson

>Not so much the size getting larger but the walls and bottom get thicker. Plus, the air fricion created carrying it into the house causes all sort of fine sanding scratches and tool marks.

Re: Not exactly a Design question, but......?

#3

Air Friction/polution......?

Barry Irby

>I gave a bowl to a friend and a few days ago I picked it and looked at it. It had been sitting on the shelf in their house for two years. I was horrified. Sanding scratches. All I could figure is either I was blind when I sanded it or perhaps there was a power failure and I did it in the dark. OR....maybe indoor pollution really is five times worse than outdoors and the bowl is being abraded to death just sitting there. I brought it back and re-sanded it and put on a tougher finish.

Re: Not exactly a Design question, but......?

#4

sanding scratches.

John Lucas

>I thought sanding scratches happened when you passed the piece to a friend. I know they aren't there when I'm holding it.

Re: Not exactly a Design question, but......?

#5

Re: Not exactly a Design question, but......?

Russ Fairfield

>I think the problem is that the trip to the house is the first time we have really taken a close look at what we have made.

Maybe we should be making that "trip to the house" more often before it is finished.

Re: Not exactly a Design question, but......?

#6

Re: Not exactly a Design question, but......?

Carole Valentine

>LOL I have gotten to the point that I periodically remove the piece from the lathe and take it outside in bright sunlight to inspect it. I can't seem to get any light good enough to show what sunlight will reveal.