Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Here I sit broken hearted

Posts

Here I sit broken hearted

#1

Here I sit broken hearted

Sean Troy

>came to turn but never started. I'm still waiting for the electrician to run a 220 line. My new PM 4224 was deleivered this week and just sits there laughing at me. I haven't been able to turn for 2 months with packing up the shop to sell our house and now moving in to our new house.Reading the fourm has been a big help. Seeing all the turning going on at the symposium has got me very itchy to get at it. I'd run the 220 myself but I'm going to have a sub panel installed and have no experience with that. At least I have time to gather up some wood.

Re: Here I sit broken hearted

#2

Sean, how about running....

TDaniel

>an extension cord from the dryer outlet for temporary service? A 12 gauge extension cord would be more than adequate; just adapt the ends.

Re: Here I sit broken hearted

#3

Paul Porter

Re: Here I sit broken hearted

Paul Porter

>Hey Sean, I feel your pain. I had to wait a week for a 220 line to be run into my shop after my 2436 arrived.

I hope things a going well for you and your family in KY.

Paul

Re: Here I sit broken hearted

#4

Re: Sean, how about running....

Sean Troy

>Hi Terry, unfortunatly, the dryer is about 50 away. Thank you though for trying to come up with a solution.

Re: Here I sit broken hearted

#5

Re: Here I sit broken hearted

Sean Troy

>Things are going very well Paul.The people in Kentucky are about the nicest people you'll ever meet.

Re: Here I sit broken hearted

#6

50 ft is no problem

TDaniel

>

Re: Here I sit broken hearted

#7

A subpanel is not that difficult

Bob Fawcett

>If you are comfortable running a line, I am sure you could also do the subpanel.

You could also run the line and use it. Let your electrician do the sub panel. He would have to remove your lathe connection when he can gets there.

Re: Here I sit broken hearted

#8

Re: Here I sit broken hearted

Ron McKinley

>Kinda in the same boat. I ordered the #3520b in Louisville and it's about 2 weeks away and so is the electrician to install the 240VAC. But, I have my trusty Jet Mini to use in the meanwhile......Ron

Re: Here I sit broken hearted

#9

Re: Here I sit broken hearted

RevDoug

>Sorry to hear that you are down for a bit. It will get worked out and you'll be on your way in no time. Also good to hear that you've gotten moved. I was wondering about the move the other day. Had not heard when it was that you were going to move. Where did you end up buying a house?

Turn 'em round,

Re: Here I sit broken hearted

#10

Re: Here I sit broken hearted

Sean Troy

>Henderson Kentucky

Re: Here I sit broken hearted

#11

Re: Here I sit broken hearted

RevDoug

>You are only an hour and a half west of me. We'll have to get together sometime soon. I have a sister-in-law in Owensboro that we go to visit from time to time. Maybe next time we're going over there I can get in contact with you and we can meet.

Turn 'em round,

Re: Here I sit broken hearted

#12

Brad Vietje

Bummer ! Can you wire a 240 box yourself ?

Brad Vietje

>Sorry to hear that, Sean ! I'll bet with all the rain and flooding, electricians are pretty busy, too.

I wired my own 220v, 20A circuit directly off the main panel in my barn/shop. Here in VT if you own the building, you can do all the wiring yourself, unless you are renting the space to someone else. I suppose our state's attitude is if you want to burn you own house down, that's your business.

But, in all seriousness, it was a piece of cake to do, and I'm no electrician. I did all the 110 wiring for the office I built, and that was all the experience I had (after assisting an electrician friend a few months back do a job at my former house. I just shut off the main, and did the wiring on a sunny day when there was adequate light. Of course, since my shop is in a barn some 175' away from the house, it was easy to shut off the main line from the house to the barn, insuring that there was NO power to the main panel (which I also tested 'cuz I no dummy !) If you are working off the main panel connected to the outside grid, you can turn off the main breaker or switch, but the paner is still powered by the big dangerous fellas coming in from the utility, and that would be a pretty dicy situation -- I'd wait for the pro's too.

Safe spinning (and wiring),

Brad Vietje

Newbury, VT

Re: Here I sit broken hearted

#13

Re: Bummer ! Can you wire a 240 box yourself ?

Sean Troy

>Yeah, i thought i would rather be safe than sorry.