Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

sandpaper cutter

Posts

sandpaper cutter

#1

sandpaper cutter

Curt Fuller

>This may be an old trick that most of you are already using, but I just learned this awhile back so I thought I'd pass it along. At a club meeting a few months ago one of our 'old timers', Fred Hunger, told us about how his wife has him on a short leash and a tight budget and complains everytime he has to buy sand paper. So he made one of these cutters to ration out his sandpaper and it makes a sheet of sandpaper last almost forever. It's just a piece of plywood with an old hacksaw blade screwed to the edge and the outline of a sheet of sandpaper cut in half, then in half again and again until it's about 2x3 inches. You cut the paper down into the small pieces and then fold them in half, sand with one side until it's worn out then the other. I used to just cut sandpaper sheets into fourths but this way a sheet of paper seems to last forever. I just cut them down and put a rubber band around a stack of the small pieces and it seems like a 2x3 piece of paper lasts as long as a quarter sheet lasts. Anyway, I thought I'd pass this along to anyone else who is on a short leash and tight budget like Fred and me.


img

Re: sandpaper cutter

#2

Re: sandpaper cutter

William Duffield, on the Cohansey

>Great idea.

A couple of comments:

Instead of folding the paper in half, I find it works much better if I fold it in thirds. It's stiffer, and the grit surfaces still don't rub against each other.

If you really want to save money on sandpaper, consider working with a card scraper instead. It's easy to renew the cutting surface with a file, stone and burnisher, You can make the cutting edge in any shape needed by whatever turned shape you are finishing. If you are on a really, really short leash, you can make lots of card scrapers from an old saw you can buy at a flea market or yard sale for about $5 or so.

If you don't understand card scrpaers, ask on the Hand Tool forum.

Re: sandpaper cutter

#3

Re: sandpaper cutter

Doug Thompson near Cleveland

>Good idea, I will cut paper into 6 pieces then fold each one in half. Might have a picture to post.

Good job