hollowing rig suggestions please
ken chase
>I've done a few the hard way now I'm ready for a rig and don't have a clue which to get. Imput will be greatly appreciated.
thanks
Knowledge You Can Build On — Est. 1998
hollowing rig suggestions please
ken chase
>I've done a few the hard way now I'm ready for a rig and don't have a clue which to get. Imput will be greatly appreciated.
thanks
Re: hollowing rig suggestions please
Barbara Gill, Remlik VA
>I have the Kelton captured system. I also have Don Pencil's rig which I like a lot. With Don's scraper I am able to get the interior walls much smoother.
start with..
TDaniel
>a Don Pencil system. No matter what you go with later you will always use this. A captured rig is nice but it is limited in what it can do. Flat topped vessels can't be made with most captured rigs.
TD
Re: hollowing rig suggestions please
Russell L. Babbitt Jr.
>It seems like whatever jig we have we all like. I have the Jamieson system with the rear tool rest from Craft Supply. I have also made adapters so that I can use cutters from different manufactures, such as Keltons.
Re: hollowing rig suggestions please *LINK*
Paul Porter
>Ken, for larger (9" up) I use a captured boring bar like the Jamieson system. For smaller pieces I use a homemade outrigger (Basham/Johnston) hollowing tool. (See photo) I have a PDF file with the plan for this tool if you are interested.
Al Basham tools
Re: hollowing rig suggestions please
ken chase
>Thanks. I also have the Scorpion by Don Pencil. Can it be used with a rig? Does your rig have the lazer guide?
Re: hollowing rig suggestions please
ken chase
>Paul:
Yes I would like to read the material. I have never seen tools like these and very interested in how they work.
Re: hollowing rig suggestions please *LINK*
Jennifer@Indy.USA
>Ken, check out this link for some really good information on many of the choices out there.
Jen
Good Stuff
Re: hollowing rig suggestions please
john lucas
>Ken I will be setting mine up later today or possibly tomorrow. I will take some shots. It's a homemade lyle Jamieson style captured bar with homemade John Jordan style cutters. Right now I'm using a wooden secondary tool rest. I have plans for a metal one but haven't had time to build it. Anyway I could talk all day but one photo will answer all the questions so let me get in the shop and finish this other project so I can move on to the next one. I'm hollowing this one by hand and the next one with the captured bar. I haven't hollowed anything bigger than 5 inches in years and had some wood that needs to be roughed so I'm refreshing my hollowing skills because Ihave a lot more that needs to be done also.
Re: hollowing rig suggestions please
ken chase
>Thanks John:
I always value and appreciate your posts and look forward to seeing the photos.
Re: hollowing rig suggestions please
OB O'Brien
>Ken, Here's a picture of the one I make. It's designed for a mini lathe but can be modified for any lathe.
here's mine
john lucas
>This is my homemade rig. I made it out of 3/4" cold roll bar and some square tubing. It takes 3/4" boring bars.
John, Could you...
Clem Wixted
>...post some additional close-up pictures, if you have them? I am particularly interested in the corner construction details as well and how you join the boring bar to the holder and the tips to the bar. Some detail on the laser holder as well.
Thanks,
Clem
Re: John, Could you...
John Lucas
>Clem I'll try to shoot some more shots and maybe get them posted to our club website. I'll let you know when I get it done.
Thanks, John
Clem Wixted
>