We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Slowly starting to get the shape down, still a few things going on with it (1/3 way up from the bottom, there's a wierd curve change), not sure about the top either. but, this is hollow form #8, about 20 or 30 more and I should have one that looks pretty good.
Done in two pieces, seam is the middle black line. The weight is what'd you'd expect. Satin Poly over Teak Watco oil.
>I like the shape. Very smooth un-interupted curve from top to base. IMO, the collar is a bit busy. You have two different elements there. Either one alone would perhaps work better. This is NOT a critque, simply my opinion. Perhaps others can comment on it as well.
A little PhotoShop editing here to give you a visual of what I meant:
>Me too. The form is very pleasing, the collar needs work. Check out WAlly's collars. In fact, an ebony collar would make the three burnt lines tie in a bit more; as is, they detract rather than add to the piece. That's just my opinion, of course. Overall, a very well done piece,I think.
>I'm with the gang here -- a be-u-ti-ful piece, there Devon, but the collar is just a bit busy. I was wondering about the 3 lines, then noticed that you made it in 2 pieces. Pretty darned good figure match, and the slight curve change you note is not obvious in the (excellent) photo. If this is just your 3rd hollow form, we'd better keep an eye on you !
You could try an Ebony collar to relate to the lines, as Keith suggests, but I think for a piece of this size, you'd want a pretty substantial one, and maybe Peter's first option would work well. It would also be the easiest change to try, since you could just put it between centers and nip off the curved opening. I wouldn't like it much with a shorter, flattened collar, which seem to me more appropriate on a smaller, shorter piece.
Now about that cheating by hollowing in two halves... ;-)