oneway 24--16
gary s clarke
>I want to upgrade from my oneway 12-24 and because of space limits I have been thinking about a oneway 24--16 and would like any comments about experience with it. thanks
Knowledge You Can Build On — Est. 1998
oneway 24--16
gary s clarke
>I want to upgrade from my oneway 12-24 and because of space limits I have been thinking about a oneway 24--16 and would like any comments about experience with it. thanks
Re: oneway 24--16
Steve Mushinski
>Gary,
I would think you might be better off looking at the Stubby. If space is a problem then it might be your best bet! Also the fellow that sell them in the US now has unbelieveable service. One Sunday I was at a friends place using his Stubby to do some large bowls as I too have the 1224. We have a problem with the belt. He called Bill and left a message. Bill called back within half an hour. He emailed the information we were looking for and also explain how to change the belt out. This machine is about 7 years old and well used. Not purchaced from him which he also knew. Just plain old good customer service.
I have no issues what so ever with Oneway and have been a drum beater for them. With what you are faced with it might not be your best fit. -Steve
Re: oneway 24--16 *LINK*
Steve Mushinski
>
http://www.stubbylatheusa.com/cgi-bin/index.py
You'll need...
Peter Teubel
>...a better reason, Gary. :) <- Smiley
Both the 1640 and the 2436 lathes have about the same footprint.
AAAAK!
Peter Teubel
>Please disregard my last post. I read it (incorrectly) as the 1640.
Don't ask...its been a long day on the computer.
:(
Re: AAAAK!
gary s clarke
>AAAAK accepted :) actually the 24-16 is 7 inches shorter than the 12-24 so I will gain a little floor space which will help a little ie more floor to sweep up.