Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Masur Birch Hollowform

Posts

Masur Birch Hollowform

#1

Masur Birch Hollowform

Allen Neighbors

>This hollowform is from Masur Birch, sent to me by my friend, John, who lives in California.

It's 7 1/2 inches tall x 4 inches wide. Finished with lacquer and buffed.

The collar is not glued on... it's part of it. Looks like glue line around collar, but I guess it's just a spot I didn't get sanded very well. Didn't see it 'til I took the shot. Now I'll have to hand sand it and re-finish it. My shop needs more lights!

Allen


img

Re: Masur Birch Hollowform

#2

Re: Masur Birch Hollowform

Tom Stover

>Allen that is one great HF, both the workmanship and wood are great.

Re: Masur Birch Hollowform

#3

Re: Masur Birch Hollowform

Norm Smith

>Allen, That is a beauty. That is one nice piece of wood.

Norm

Re: Masur Birch Hollowform

#4

Re: Masur Birch Hollowform

Gil Jones on Lake Seminole GA.

>Al, attractive HF!! You may not need to resand/finish that ring below the "collar". I get the same ring in my HF pics (but it is not on the piece), and it is a reflection from the first radius of the collar back down on the surface below it. Maybe yours is the same??

Re: Masur Birch Hollowform

#5

Re: Masur Birch Hollowform

Carole Valentine

>Beautiful, Allen! Is this the first piece off the Great White? About that ring, those can be a bear. Here's a little tip: take a thin credit card, fold a piece of sandpaper over it and work it right up to the integral collar. Of course that is easier to do when the piece is still on the lathe. :)

Re: Masur Birch Hollowform

#6

Re: Masur Birch Hollowform

Ed Karch

>For someone who just discovered bowl gouges two months ago you are doing fantastic. rock on dude

Re: Masur Birch Hollowform

#7

Re: Masur Birch Hollowform

Bob Fawcett

>Looks great Allen.

Re: Masur Birch Hollowform

#8

Only on a Oneway

Curtis TX

>Nice...quality like that can only come from a OneWay lathe. :).....

Kidding....I am sure one could do the same on a Powermatic or....insert your brand of preference.

Curtis

Re: Masur Birch Hollowform

#9

Shhhhh...

keith zimmerman, Normal IL

>Allen, don't look now, but I think have created a very fine hollow form. When I looked at the photo before reading, I actually thought the "line" between to collar and body was a planned element of the design. As far as I am concerned, it looks good the way it is.

keithz

Re: Masur Birch Hollowform

#10

Re: Masur Birch Hollowform

Allen Neighbors

>Thanks, everyone, for your kind comments. And Carole, thanks for the tip. I never thought of a credit card... I've used just about everything else, but that seems like it would work better.

What a forum!! This place is awesome!! Thanks, everybody.

Allen

Gotta get outa here and turn a little before bedtime.... :o)

Re: Masur Birch Hollowform

#11

Re: Masur Birch Hollowform

Carole Valentine

>I use one of those fake ones they send in the mail with credit offers...they are thinner than a regular card. That and the super flexible Norton 3X paper, and you got it made.