Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Rolling Tool Rack

Posts

Rolling Tool Rack

#1

Rolling Tool Rack

Allen Neighbors

>Here's a shot of the Rolling Tool Rack that I made so I can get the tools closer to both lathes. The wheel set is from an old Hospital Gurney, and I built a 2x4 framework on that, then I added 2x4 A-frame with pegboard on both sides.

A 2x4 across the bottom of one side holds the weight of the larger tools. a shelf on top has pegs for the wooden face plates and Scroll Chucks. It rolls pretty smoothly, even in shavings.

Allen


img

Re: Rolling Tool Rack

#2

Re: Tool Rack Other side 

Allen Neighbors

>


img

Re: Rolling Tool Rack

#3

Re: Tool Rack Other side

Mike Brazeau

>Allen - looks good. I am going to borrow your compass design. Have been wanting to make one for some time and never taken the time to explore a design.

Mike

Re: Rolling Tool Rack

#4

Re: Tool Rack Other side

Curtis TX

>I like it. Are those giant boring tools?

Re: Rolling Tool Rack

#5

Re: Tool Rack Other side

Allen Neighbors

>Curtis: Yes, in the first pic are the homemade Oland Tools that I made specifically to do tall vases. They are from 1" black pipe, reduced to 3/4" black pipe, with set screws to hold the 3/4" cutting tool shaft. The shaft has 2 set screws to hold the cutting bit. The handles are filled with B-Bs for heft, and are wrapped with string or small cotton clothesline, for warmth in winter.

My ideas for the Oland Tools came from Darrell Feltmate's Webpage, http://www.aroundthewoods.com . He's an awesome guy that helps out those of us who are sometimes incapable. :o)

Mike: The large wooden thing is a caliper; it works only for long vases with straight sides. But it could be adapted to a compass easily. Go for it. My compass is a 10" inside caliper, from which I cut off the splayed ends, and filed the legs into points (as a scratch awl). It's hanging up high on the right leg of one end... in one of the pics.

Thanks for your comments.

Allen