Ebony Finials....
Wally Dickerman in Arizona
>While trying to decide what finial to turn for a vessel I decided to do as bunch of them to compare. Kind of a fun project.
Wally
Knowledge You Can Build On — Est. 1998
Ebony Finials....
Wally Dickerman in Arizona
>While trying to decide what finial to turn for a vessel I decided to do as bunch of them to compare. Kind of a fun project.
Wally
Re: Ebony Finials....
Wally Dickerman in Arizona
>The piece that I'm working on has been "copperized", and is not finished....In fact it's still attached to a glue block. It's about 5 in. in dia. I'm going to do some pyrography on it before parting ot off.
A lot of people don't like to see the wood covered with paint, stain etc. I don't disagree with that.
Wally
Re: Ebony Finials....
Wally Dickerman in Arizona
>
Re: Ebony Finials....
Wally Dickerman in Arizona
>The "foot" will disappear when I part this off the glue block.
For some reason...camera angle I suppose, finials appear larger in a photo than they actually are.
Wally
Re: Ebony Finials....
John Lucas
>Wally This is the one I like with this vessel. It has a sort of Post modern look and so does the vessel with the copper color.
Re: I like this one....
Russ Fairfield
>That tip is sort of a "flip" to the formal symmetry that we usually see on finials. It says, "I am different."
This one looks the best
Ron in Drums PA
>
Re: Ebony Finials....
Brad Vietje
>Great project, Wally, and some real nice finials.
I'm pretty finicky about finials, and I like them best when all the features have a "flow" from larger to smaller, with some central shaft tapering smoothly from one end to the other.
Thus, looking at the ones in the first picture from the left, I like #'s 2,3 and 5 the best, I'm less excited about #1 and #6, and I like #4 the least. The issue I'd have with #4 is that the second feature from the bottom is a lot bigger than the first; this is also the case to a smaller degree on #3, but the difference is smaller, and that one works better for me -- maybe because of the little flared tip, which is just perfect. The first one (#1) looks just a tad bulbous to me -- I'd like it better if the big "flame" figure narrowed down and reversed just a bit sooner. #5 is my favorite, and I think it really works well when shown on the hollow vessel.
Just my 3 cents, and only one workin' Joe's opinion...
Safe spinning,
Brad Vietje
Newbury, VT
Re: Ebony Finials....
georgetroy
>Good looking finials Wally, next thing you know you will be turning chess pieces out of ebony.GT
Re: Ebony Finials....
Juergen
>I agree this one is my favorite. Having said that, I think it would be fitting of the contemporary style to have only one of the two lower elemments. Less is more! Check out Jeff Lavine's Snap lid Boxes on WOW
Re: Ebony Finials.... *LINK*
Juergen
>Look lie the link did nake it. Here's another try.
Snap Lid Box w/Contemporary finial
Re: Ebony Finials....
Barry Turner
>Don't you just love the way Ebony turns........?
This is my favorite.....and a lightbulb goes on!
Jennifer@Indy.USA
>Wally, I really love this combination. The copper finish and the more modern looking finial really make a neat combo in my eye. And as usual I learned something very interesting from your post here. I usually try to make the finial all one piece. You are making yours to fit inside a collar. Duh! That looks like such a better way. Why does it always take me so long to "get it"?!!!
What would I do without all of you? Struggle along more than I do I suppose!
Jen
Re: Ebony Finials....
Wally Dickerman in Arizona
>Thanks Folks for your comments....It's interesting that there is a favorite, but there are other opinions.
I've found that pen blanks make good finial material.
Wally