Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

PM3520 wiring

Posts

PM3520 wiring

#1

PM3520 wiring

Spence in Rhode Island

>Getting ready to run the wires for the new lathe. Which would be better nm12-3 w/ground or nm10-3 w/ground? Also 15 amp or 20 amp circuit breaker? I'm also putting the Rikon 18" bandsaw on the same circuit since only one machine will be used at a time. I know that's not really the correct way to do it but space is limited in the pannel and after paying for the two machines money is in short supply also. ;) So whats the best way to go here?

Thanks

Spence

Re: PM3520 wiring

#2

12/3 is adequate

TDaniel

>and will handle 20 amp @ 220 volts. I prefer to use the minimum size breaker that will not kick out under a load. I have 2 lathes, (a 3 hp and a 2hp) on one 20 amp breaker and it has never tripped. The likelihood of having both machines pull full load at the same time is almost nil.

Re: PM3520 wiring

#3

Re: PM3520 wiring

Bill Howatt

>I agree with the #12 wire and 20A breaker. There is nothing wrong with having more than one tool on a 240V line. Of course, it is silly to do it if you know that they will both be used at once and by doing so it will cause the breaker to trip. Most tools in the workshop rarely draw their maximum current.

Bill

Re: PM3520 wiring

#4

12-2/wground

Gerry Meekins

>Spence,

If you are planning to run 12-3 or 10-3 you can save yourself some money on the wire by running 12-2/wground with a 20 amp breaker. Thats what I'm using with my Rikon and 3520. I've never had any problems.If you decide to run 10-2/wground go with a 30amp breaker.

Have fun!

Gerry

Re: PM3520 wiring

#5

Re: 12-2/wground

Bill Howatt

>Only problem with 30A breaker on #10 wire is that the plugs and receptacles also have to be rated for 30A.

Bill

Re: PM3520 wiring

#6

Thanks Guys!

Spence in Rhode Island

>I'll be going with the 12/3 and 20amp breaker. So its off to the borg in the morning. I'll let ya know if I survive. LOL