Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Jet Mini Home built stand/bench

Posts

Jet Mini Home built stand/bench

#1

Jet Mini Home built stand/bench

Mike D, Fairport, NY

>I ordered the Jet Mini VS version from Amazon yesterday. They had them on sale for 339. After the 10% discount and the discount for signing up for their credit card (which I will cancel after paying off next month) it came to $275. (free shipping.) Not a bad value I think.

I would like to build a stand for it and my Tormek. Does anyone have any examples of home build mini lathe stands/bench?

Should I design into the stand some vibration dampening or is that not such a concern with the mini? Planning on using the space below the lathe and grinder as cabinet/drawer space to house tuning supplies.

Would a slab of bowling alley be a good bench top for this?

Any words of advise would be appreciated.

Re: Jet Mini Home built stand/bench

#2

Re: Jet Mini Home built stand/bench

Greg Humphreys

>Wow, and I thought I was doing good when I picked up JETs standard mini lathe for $250! I don't have any plans for a stand, but I also am interested is seeing what others have done, as I will be building a stand within the next couple of weeks. For now the lathe is sitting on a piece of plywood that is screwed to two sawhorses.

Congratulations on a nice lathe at such a great price.

Re: Jet Mini Home built stand/bench

#3

Re: Jet Mini Home built stand/bench

Russell L. Babbitt Jr.

>If you are considering something like rubber feet under the lathe I would vote against that. That would probably introduce more vibration than reduce it. The picture I attached is the cabinet I made for my Vicmarc mini. If you build a heavy cabinet and fill it up with "stuff" that should help eliminate any vibration.


img

Re: Jet Mini Home built stand/bench

#4

Re: Jet Mini Home built stand/bench

Tony - Memphis

>I don't have a pic, but I made a real simple stand out of 2x4's and mdf. The bottom shelf holds a bag of play sand. The whole thing is on casters too. It doesn't move much at all. No vibration that I can tell. I'll try and snap a picture. May not be what you are looking for, but it was cheap and quick!

I have the non VS speed Jet. They did a nice job with this product. I've really enjoyed mine. Mostly for furniture pieces with some assorted odds and ends for fun and getting rid of scraps.

Tony

Re: Jet Mini Home built stand/bench

#5

Re: Jet Mini Home built stand/bench *LINK*

e

>bay area woodturners built several for their classes...

they work great.


lathe stands

Re: Jet Mini Home built stand/bench

#6

Re: Jet Mini Home built stand/bench

Bill Hale / Woodspinner

>I guess I just have a lazy streak.

I use a mechanics toolchest with wheels. I put a plywood top on it and a vertical back for my most commonly used tools. The top drawers hold all of the other small tools, jaw chuck etc. The lower drawers hold misc. stuff like pen works, bottle stoppers etc.

When not in use it rolls into the cornerand takes up very little room.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Jet Mini Home built stand/bench

#7

Re: Jet Mini Home built stand/bench

john lucas

>Mike I took some photos of my stands but my card reader isn't working tonight. I'll load them at work in the morning and send them.

Re: Jet Mini Home built stand/bench

#8

Nova Comet bench

John Lucas

>Here is my stand for my Nova Comet. It's not done yet it got put on hold when I moved and I haven't taken the time(and money) to finish it. It will have a rolling base so that I can roll the whole thing in when doing demo's. The bottom will store the grinder and vacuum chuck for traveling. The lathe comes off and the motor is in the top cabinet so I can move each piece into the truck seperately.


img

Re: Jet Mini Home built stand/bench

#9

Jet mini vS treadmill motor stand

John Lucas

>Here is a project in the finishing stages. I changed the motor to a vega treadmill motor and mounted it below the lathe. I have a fan and filters installed to keep it cool and clean.


img

Re: Jet Mini Home built stand/bench

#10

Jet mini VS detail

John Lucas

>Here is a shot with the door open. Excuse the mess I have the circuit board out temporarily for a minor repair.


img

Re: Jet Mini Home built stand/bench

#11

Jet mini stand

John Lucas

>Here is a shot of the jet mini stand I use for the Non VS version. If I was making it differently I would use 3/4" plywood instead of 1/2". It's a little too light with 1/2" ply and needs some weight. I may put a box in the bottom to hold more Jet Accessories and add some weight. I also need to clamp or bolt the lathe down. It wobbles too much just sitting there.


img

Re: Jet Mini Home built stand/bench

#12

Brad Vietje

Thanks, John -- these are great stands !

Brad Vietje

>

Re: Jet Mini Home built stand/bench

#13

Re: Jet mini stand

Greg Humphreys

>John,

That is a nice looking stand--I will probably build something like it within the next few weeks. I'm curious, what do you do for dust collection (or chip collection)? Do you have any items you've made that seem to work well, or do you just vacuum the mess after your finished turning?

Re: Jet Mini Home built stand/bench

#14

Re: Jet mini stand

John Lucas

>Greg I have a stand that sits behind the lathe and holds the dust collector hose. It really only picks up the fine dust and you still have to sweep up or vacuum. It does keep some of the finer shaving from flying up into my face.