Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Greensboro, NC

Posts

Greensboro, NC

#1

Greensboro, NC

Steve Roxberg

>Are there any good woodworking or woodturning stores or sites in the Greensboro, Durham, Raleigh area.

Re: Greensboro, NC

#2

Re: Greensboro, NC

Earl Kennedy

>Yes Woodcraft.504 Four Seasons Town Center.Also Rocklers.Don't know the address.

Re: Greensboro, NC

#3

Re: Greensboro, NC

Thad

>There's a Klingspors in Raleigh

Re: Greensboro, NC

#4

Re: Greensboro, NC

Barbara Gill, Remlik VA

>Wall Lumber is not too far from Greensboro. Take 220 North to Mayodan. Also in Graham NC there is Woodworker's Supply of NC. I think you take exit 148 off of I85. When you are driving South on I85, you will see it on the right before you get to the exit.

Re: Greensboro, NC

#5

Re: Greensboro, NC

Steve Roxberg

>Thanks guys, that's exactly what I was looking for. I'll have lots of time to waste and will drive between Durham and Greensboro at least twice. The Woodworkers supply will be fun, I've never seen one of their stores.

I flew down here, so I probably best stay away from the lumber yard.

Re: Greensboro, NC

#6

MESDA at Old Salem

Tony - Memphis

>Nothing to buy, but a great museum.

Tony (the folks live in High Point)

Re: Greensboro, NC

#7

Re: MESDA at Old Salem

Barbara Gill, Remlik VA

>That is right. Old Salem has some very interesting woodworking stuff.

Re: Greensboro, NC

#8

Re: Greensboro, NC *LINK*

George (Oxford, NC)

>Raleigh: Woodcraft (Glenwood Ave north of the beltline), Klingspor Capitol Blvd just outside the beltline and Harbor Freight just across the street from Klingspor

Greensboro: Woodcraft (High Point Blvd exit off of I40), Rocklers (Wendover Ave exit off I40)

Halfway between on I85/40 (Exit 148): Woodworkers Supply

Hardwood Store of NC (take exit 158 -Route 61) off of I85/40 go 5 miles north to Gibsonville. Even if you just look since you can't carry lumber on your plane.

Go to www.ncwoodworkers.net and I'll bet you can find at least a couple of guys with shops you could visit. One that comes to mind is the manager of the Woodcraft in Raleigh (Toolferone on the ncwoodworkers site), he has a great shop not far from the store.

George


ncwoodworker.net

Re: Greensboro, NC

#9

ERROR - Exit 138 not 158

George (Oxford, NC)

>