Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Pulled that trigger!

Posts

Pulled that trigger!

#1

Pulled that trigger!

Spence in Rhode Island

>Yep, in two weeks I will be the very happy new owner of a PM 3520B. :) Also ordered a Rikon 18" bandsaw that will arrive in a week. Got a very good deal from the folks at my local Woodcraft here in Rhode Island. Now I have to rearange the shop and try to figure out the wiring for the new machines. I have an unsed electric wall heater that runs on 220v so it more the matter of pulling wire and new outlets and such. Be prepared for lots of dumb questions from Lil Rhody! LOL

Spence

Re: Pulled that trigger!

#2

Re: Pulled that trigger!

georgetroy

>Congulations Spence. You will like that heavy iron and working off the end of the bed. Looks like you are a recent member of:

http://groups.msn.com/PowermaticLatheOwners. GT

Re: Pulled that trigger!

#3

Re: Pulled that trigger!

Spence in Rhode Island

>Thats right George, I joined the owners group and then went out and bought one. A little backwards is the way I usually operate. ;) Keeps things interesting that way. My patience is already wearing thin. LOL

Thanks

Spence

Re: Pulled that trigger!

#4

Re: Pulled that trigger!

Doug Thompson near Cleveland

>Spence, I for one believe you made a very good choice. The Ricon BS has many good reviews... do you want to trade for a slightly use 17 inch BS :-)

Now the PM at any price is one solid machine. The best feature is the sliding headstock that I keep about one third of the way down then to turn the inside I'll stand at the end of the lathe. A 50 or 60 pound chain sawn blank is no problem either.

If you have any questions ask.

Re: Pulled that trigger!

#5

Re: Pulled that trigger!

Bob Fawcett

>I love my PM. I turned my first large piece the other day. Roughed out 2 large bowls from 2 halves of 16 or 17" Oak log, no problem at all for the Powermatic.

Get the 18" extension and the tool rest extension. You can mount the bed extension on the leg and turn 38" off the end.

Re: Pulled that trigger!

#6

Brad Vietje

Atta-go, Spence !!

Brad Vietje

>

Re: Pulled that trigger!

#7

You'll be happy with both...

Gerry Meekins

>Just remember to toss the funky blade that comes with the Rikon and get a good one before you try to cut some blanks!

Good luck!

Gerry

Re: Pulled that trigger!

#8

Thanks Guys!

Spence in Rhode Island

>As a matter of fact I also ordered the 18" bed with the extended tool rest. Maybe turn some table tops? LOL I think the Rikon will be a great addition to the shop as well as for cutting up large turning blanks. Hopefuly by the time the PM shows up I'll have the Rikon dialed in and ready to go. I'll try to post some pics when its all set up.

Thanks again

Spence

Re: Pulled that trigger!

#9

Re: Pulled that trigger!

Bill Grumbine (Kutztown PA)

>Congratulations Spence! You had better get those boys to work in the shop. I knew I should have acquired that burl while I was there. Just think of all the extra room it would have made for you!

Bill

Re: Pulled that trigger!

#10

Re: Pulled that trigger!

Spence in Rhode Island

>LOL Bill! Ben is still grumbling about moving that baby. Once I get the bugs worked out of the 3520 that burl is going for a ride. :) First I have to figure out the electrics and then rearange the mess...errr... I mean shop. ;) Getting better with the gouge all the time but not quite sure if I have the Grumbine Grind down pat yet. Lucas is doing good too. Will see ya at the picnic.

Spence