Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

First Pen.....9 y.o. Monster Created

Posts

First Pen.....9 y.o. Monster Created

#1

First Pen.....9 y.o. Monster Created

Mike D

>I just found out how quickly the Pen turning hobby can be.

My son and I went to the local Woodcraft this weekend to see a pen turning demo. My son was mesmerized. He has never shown any interest in the shop before, but now he was very excited to try this. As the demo was ending the manager of the store offered to let some of the audience give it a try. My son's hand shot up quicker then a Patriot Missle.

He got right up there (after they found a suitible platform to stand on) and got right after it. A few corrections here and there by the instructor, but he got the technique pretty quickly. We didn't get to finish the pen there, but we took it home to finish.

I was so proud of my son and very excited that we found a mutual interest in turning that I went on a little shopping spree at Woodcraft to load up on pen turning supplies. I tell my son to pick out a roughing gouge to use...Of course he picks the same one they demo with...a 3/4" Robert Sorbey.

In my excitement I also finally broke down and splurged on the Tormek sharpening system with the turning jig package. (mini-gloat)

So we get home and he can not wait to get on the lathe and finish it up. Unfortunately my current lathe is the Delta 46-700 with a 12" tool rest. Not the optimal machine for pen turning, but we made do. Below is a picture of my 9 year old son's first effort...

Plans are now in the works for Grandfather's day gifts, teachers gifts..."Who else can we give them to, Dad?"

So I am rethinking my lathe requirements now. Originally I was aiming to replace my Delta with a lathe that would be specifically for bowl turning. Looked at the Vega 2600, and old Union Graduate Bowl lathe and the Jet and Delta 1642 models. Think I am going to move away from the strictly Bowl type lathe. The 1642 size looks good. Or maybe I will buy him the mini and save for the Powermatic 3520...too many choices. Any suggestions? The Delta lathe is already up for sale.


img

Re: First Pen.....9 y.o. Monster Created

#2

Re: First Pen.....9 y.o. Monster Created

Phil Joines Krum, Texas

>Your lathe should work fine for pens. Just get another tool rest.

Re: First Pen.....9 y.o. Monster Created

#3

Re: First Pen.....9 y.o. Monster Created

Allen Neighbors

>Mike, you'd better go ahead and get the Bowl Lathe, AND the mini. You can see what's coming don't you? First off, he'll make everyone he knows a pen, and then there's all those girls at school, too... :o) Maybe a year or two will pass by, and then the urge will strike, to turn something bigger to impress that person he REALLY wants to impress...

Yep, we can all imagine that you've got a fine turning partner. You might as well go all out. You know what's coming. You know he's worth it! :o)

Allen

Re: First Pen.....9 y.o. Monster Created

#4

JL

Re: First Pen.....9 y.o. Monster Created

JL

>Can't go wrong with a good mini. It's portable and you can build a smaller stand for him now. As for a future lathe? Save up the pennies for a larger one.

Re: First Pen.....9 y.o. Monster Created

#5

Re: First Pen.....9 y.o. Monster Created

Mike D

>My son has his eyes on the acrylic pen blanks. Can the acrylic pen blanks be turned and polished at 2000 rpm? The folks at Woodcraft were suggesting that a faster lathe would be more appropriate.

Re: First Pen.....9 y.o. Monster Created

#6

Re: First Pen.....9 y.o. Monster Created

Rick Allen

>The recomendation is to turn the acrylics at a slower speed than wood. If the acrylics get hot, like from sanding you can have a bit of a mess. 2000 rpm is fine for acrylics. For wood the higher speed is prefered.

Good luck with you choices.

Re: First Pen.....9 y.o. Monster Created

#7

No Problem

Jim Shaver Oakville, Ont.-Let's Go Oilers!

>Hi Mike,

I turn and polish stabilized woods and acrylic's at 2700 rpm on my Jet Mini, works great.

Nice looking pen too by the way!!

:-)

take care,

Jim

Re: First Pen.....9 y.o. Monster Created

#8

If you just want a PEN lathe... *LINK*

Peter Teubel

>...for short money, you might want to consider a Wilton mini lathe (see link below). Variable speed, single pully, MT#1. I just got a couple of them and for JUST pens, they are fine. I would even consider turning anything bigger. Doesn't have the power. You can read my review at Amazon. At $89 w/free shipping (they have a 10% off sale this month), its a cheap, yet functional pen lathe. Its basically the same lathe as the Penn State TurnCrafter Plus (not Pro).


Wilton Mini Lathe

Re: First Pen.....9 y.o. Monster Created

#9

Re: First Pen.....9 y.o. Monster Created

Gil Jones on Lake Seminole GA.

>That is a very nice looking pen!!

Re: First Pen.....9 y.o. Monster Created

#10

Re: First Pen.....9 y.o. Monster Created

Paul Hammer

>GREAT job on the pen. Keep up the good work.

Re: First Pen.....9 y.o. Monster Created

#11

Re: First Pen.....9 y.o. Monster Created

Barry Turner

>It doesn't have to be "Either, Or". Buy your son a Jet Mini for pens and other small stuff. Then buy youorself a bowl lathe.

Re: First Pen.....9 y.o. Monster Created

#12

Re: First Pen.....9 y.o. Monster Created

Rick Davenport

>Mike,

It's really cool that you can find something to do with your kid that you both are interested in.

Enjoy!

Rick

Re: First Pen.....9 y.o. Monster Created

#13

Re: 9 y.o. Wood turner. Congrats !!

Ray Carson, New Jersey

>What a great story. I can tell your proud and excited about your sons interest by the post.

Wow, 9 yrs. old, that's fantastic! Keep up the good work Dad.

Re: First Pen.....9 y.o. Monster Created

#14

Get your son a mini ...

Bob Fawcett

>or you may never get to turn again.

He will want to turn when you want to. Get him a mini so you can both turn.

Woodcraft has a Father's day special on the mini and a chuck. The Jet mini is a great little lathe that has virtually no limits within its swing range.

Re: First Pen.....9 y.o. Monster Created

#15

Re: Get your son a mini ...DONE!

Mike D, Fairport, NY

>I actually ordered the Variable speed version from Amazon yesterday. They had them on sale for 339. After the 10% discount and the discount for signing up for their credit card (which I will cancel after paying off next month) it came to $275. (free shipping.) Not a bad value I think.

Re: First Pen.....9 y.o. Monster Created

#16

Re: First Pen.....9 y.o. Monster Created

Greg Humphreys

>Awesome first pen--definately something to be proud of. If my son were interested (and he may be someday, but he is only 6-years-old at this time), I think I would purchase him a mini lathe and save for the Powermatic.

Have fun.

Re: First Pen.....9 y.o. Monster Created

#17

Re: Get your son a mini ...DONE!

Bob Fawcett

>Great idea :-)

and great value.