Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

It works!

Posts

It works!

#1

It works!

Jim K in Trappe PA

>I got a new lathe delivered to my garage last week. I dragged it through the house into the basement and and this weekend ran a 220V line (220, 221, whatever it takes). My prior lathe was a second hand 12" delta that I bought 18 months ago to see if woodturning wood be something I like (not knowing anything about turning at the time). After a few false starts, I turned it on, and it works! Based on limited use, so far I like my new lathe more than my old lathe.


img

Re: It works!

#2

Re: It works!

Bill Neddow

>You've got yourself one sweet lathe! I have hand one for about six years now, and we are old friends. But every once in a while, when I try something new and stretch my knowledge of my old friend, I stop in amazement and say: "Good lord -- they thought of that too!" I am a tool junkie and have lots of them. But this is the only one where I have this reaction.

Re: It works!

#3

You died and arn now in heaven.

Norm Smith in Nova Scotia

>

Re: It works!

#4

Re: It works!

Rick Allen

>Hi Jim

It only gets better and better. You will find that this lathe has few limits. In fact you will find that this lathe get out of your way so that you interact with the lathe less and the spinning hunk of wood more.

I recomend getting the hand wheel hub to make a handwheel. Use a nice piece of wood that can be polished with many coats of finish. I use the handwheel all the time and most folks will comment on the handwheel as it is the only thing on the lathe which is polished wood.

The handwheel will get some stray finish or glue on it from time to time. That gives me the chance to sand it smooth and add a new coat of finsh. I would guess that the handwheel has 20 coats of finish on it right now. It feels smooth and warm to the hand.

I have had the lathe for about 3 years. I still smile everytime I see it.

If you ever have a problem with the lathe call Oneway. They will have everything working they way it should quickly.

BTW What's the serial number?

Re: It works!

#5

Nice pile of shavings

Doug Thompson near Cleveland

>I've never seen one in person but they must be wonderful to use. This should last a lifetime... Enjoy.

BTW - Nice bowl.

Re: It works!

#6

Re: Nice pile of shavings

Jim

>Schwwweeet!

I'm totally jealous. Perhaps one day when I'm rich and famous...

Enjoy that lathe!

Re: It works!

#7

Re: It works!

Allen Neighbors

>Jim, you just made me drool some more. :o)

Still waiting on my 1640... without much of anything called patience!

Congratulations on the new lathe. Happy turning!!!

Allen

Re: It works!

#8

I'm envious, dude! Congrats on the new purchase.

Eddie Pacheco, San Jose, Ca.

>