Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Turning Magnolia?

Posts

Turning Magnolia?

#1

Turning Magnolia?

John McGaw

>I normally hang out at the messages forum but I have a specific turning question. Sometime this week I'm going to have a largish magnolia (Magnolia grandiflora aka your regular southern magnolia) tree dropped. The tree guy says it is 90-100 feet tall. And it is no more than 25 feet from my house which tells you why I'm paying somebody else to drop it.

I'm going to have a lot of wood and trash to clean up since I'm doing that part myself to save some $$$. Have any of you turned this sort of magnolia? I know that almost anything can be turned so I'm really asking "is it worth my effort to rough out some bowls or vessels or should I just haul it to the roadside for the city to pick up?"

Re: Turning Magnolia?

#2

Re: Turning Magnolia? *LINK*

Gil Jones on Lake Seminole GA.

>Hi John, Magnolia is very nice wood, and is easy to turn (at least when green, I do not know about dry). I would not waste it. Also, it responds well to the Denatured Alcohol soak, drying treatment.


Gil's gallery on WR

Re: Turning Magnolia?

#3

Re: Turning Magnolia?

Ed Moore

>I think that magnolia is an excellent wood to turn. It looks a little like the white part of poplar trees and has lines that make it interesting. Look at Gil's piece in his link. Don't waste it, turn it!

Ed

Re: Turning Magnolia?

#4

Re: Turning Magnolia?

Carole Valentine

>Gil, where's the pic of the final product? Did you lose the rim or what? That magnolia looks really nice. I have a big section of trunk sitting outside the shop...guess I should get out the saw, wack it up and give a piece a turn.

Re: Turning Magnolia?

#5

Brad Vietje

Re: Turning Magnolia?

Brad Vietje

>Turn it John !

Get yourself a bucket of Anchorseal right away !

I live where Magnolia doesn't, so I've never had the pleasure of turning nice fresh, green Magnolia, but I have a beautiful platter turned by a freind in California, and its gorgeous. He had some with very dark, rich brown heartwood, and very light, creamy sapwood -- really nice looking wood. He says it turned and finished very well.

Best of luck, and seriously -- get the Anchorseal (or other end grain wood sealer) NOW -- don't wait until the tree is felled.

Safe spinning,

Brad Vietje

Newbury, VT (where Magnolia ain't...)

Re: Turning Magnolia?

#6

Re: Turning Magnolia?

John McGaw

>I already have a quantity of AnchorSeal in the shop. Not a huge amount but plenty for preserving several dozen pieces of the tree. I haven't been turning much lately. Well, that isn't true. I haven't been turning much for at least eight years but I guess I can spare a bit of time from the remodeling which isn't getting done anyway and give the magnolia a go.

Re: Turning Magnolia?

#7

Re: Turning Magnolia?

John McGaw

>A nice looking piece. Was that a crotch? Otherwise I can't figure out what the orientation might have been given the ring structure. I learned texturing from John Jordan on one of his teaching visits to Alaska and still have all of my custom-made "tools" so maybe I'll give that a try on a few of the pieces I hope to turn from the magnolia.

I'll be glad to get that wicked-big tree out of the front yard. Ignoring, of course, oak and hickory trees that are about the same size and only slightly further from the house and the pine trees which are even taller and only slightly further than the oaks and hickorys. As much as I love big trees they do get a bit intimidating during storms.

Re: Turning Magnolia?

#8

Re: Turning Magnolia?

Gil Jones on Lake Seminole GA.

>Hi Carole,

Guess I need to take a pic of it finished.

Decided to keep the rim.

Re: Turning Magnolia?

#9

Re: Turning Magnolia?

Scott Hurley in N. VA

>My experience with it is that it spalts quickly, and is subject to blue stain, so turn it and dry it quickly. Once it actually spalts, it has a nice pattern - although almost too much for some people. It turns very easily.

Scott

Re: Turning Magnolia?

#10

Re: Turning Magnolia?

Gary Evans Tallassee, TN

>Hi John,

Where are you located?

I have a piece of Magnolia from FL which has a lovely chocolate brown heartwood. They call it Blackheart magnolia down there. I'd be interested to see what yours looks like.

Gary

Re: Turning Magnolia?

#11

Re: Turning Magnolia?

Bob Herrman

>Turn it John. Magnolia turns like popular and Sasafras. I have turned it green and it turns easy, but watch for molding. Wiping varish or boil linseed oil does turn it form a cream to light brown. Like other wood it is harder to tuen when dry. Does have some tear out, but good on sanding will clean it up. All in All, it turns well. Have Fun.

Re: Turning Magnolia?

#12

Re: Turning Magnolia?

Gil Jones on Lake Seminole GA.

>This is the finished Magnolia turning.


img

Re: Turning Magnolia?

#13

Re: Turning Magnolia?

Gil Jones on Lake Seminole GA.

>John, it was not crotch wood, just turned side grain.