Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Things to do in North Carolina

Posts

Things to do in North Carolina

#1

Things to do in North Carolina

Tom Sweeney - Coatesville, PA

>Hey Folks,

I haven't been around much for a few months because I've been way too busy to keep up with my WW'ing hobby. Hopefully by winter that will change. Next Saturday I'm heading down to Mississippi with a group on a home repair mission trip then back to work for a week then LOML & I are taking a long overdue & much needed vacation. We're driving down to Asheville, NC from 7/1 to 7/4 then over to Mooresville / Davidson, NC (Lake Norman) for the rest of the week. We're definitely doing the Biltmore & I found the Mint museum in Charlotte that looks like a real winner. Anything else that is a must see - woodworking or otherwise - in these 2 areas? I like auto racing, but not a huge NASCAR fan & don't want to drag LOML to one of the team shops in Mooresville. Mostly looking for R&R, but a few interesting side trips would be good. The trade school I work for has a school in Mooresville, partnered with NASCAR actually, & I want to check out the area & the school because I'd like to get transferred down there in a few years.

Thanks for any pointers & I hope to be around more in the near future.

Re: Things to do in North Carolina

#2

Re: Things to do in North Carolina

Raymond Overman in SC

>The Mint Museum of Craft & Design in downtown Charlotte is definitely worth the trip. They have pieces from the Jane and Arthur Mason Collection on display most of the time. Charlotte also has a Woodcraft and Klingspor, the Charlotte woodturners meet every third Thursday at 6:30 PM and would be glad to have you if you're going to be around at that time. Just send me an email if you want specifics.

Asheville has quite a few interesting galleries including one at the Grove Park Inn. New Morning Gallery is fun to walk through. If you like cookies, try Picnics.

Re: Things to do in North Carolina

#3

Re: Things to do in North Carolina

GaryG in MD

>Tom,

Ashville is very active in arts & crafts. It's a great town for window shopping. The Grove Arcade has a number of art/craft stores. Lots of good restaurants.

The Folk Art Center on the Blue Ridge Parkway at Ashville is well worth the visit. (They have a set of Osolnik candle sticks.) If you like nature, the NC Arboretum in Ashville (also right off the Parkway, but on the other side of town from the Art Center) is a must. They have great gardens and excellent walking trails.

Plan to spend a whole day at the Biltmore (the house has 4 acres of floor space, seriously) -- get the audio tour of the house; it's well worth it. The gardens are extensive, plus a farm, winery, etc. Don't go on a weekend if you can avoid it. The crowds are intense.

Enjoy, Gary

Re: Things to do in North Carolina

#4

JL

Re: Things to do in North Carolina

JL

>A bit further afield is the Great Smoky Mountains National Park. Definitely worth seeing. Probably be crowded that weekend though.

Re: Things to do in North Carolina

#5

Visit Old Salem

Michael Stadulis, in Gloucester County, NJ

>

Re: Things to do in North Carolina

#6

Re: Things to do in North Carolina

Jim Pugh, Ohio

>While you are in the Lake Norman area look up Big Daddy's restaurtant for fresh seafood and steaks. When I was there a few years ago their listing for steak preparation was "rare, medium and ruined". Their fresh steamed shrimp will make you fall right off your stool.

Re: Things to do in North Carolina

#7

Re: Things to do in North Carolina

johns

>Tom, Check out the Raptor Center on Hwy 16. You can see some really neat birds of prey upclose.

Re: Things to do in North Carolina

#8

and MESDA

Tony - Memphis

>MESDA is part of Old Salem. Great furniture collection. I second all the other suggestions too. NC is a great state (yes, I'm a Tarheel).

Tony

Re: Things to do in North Carolina

#9

Re: Things to do in North Carolina

eaglesc

>If you travel west from Ashville to Mooresville you will go through Hickory, Furniture capital and Klingspors.Along with their great selection of "stuff" they have bulk bins of Klinggspor "gold" cloth sand paper at $3.00/lb.You may not have all the grits you are looking for but it's worth a shot.

Great people to deal with.

If you are a gigar smoker JRS on I77 somewhere near exit 52,There are plenty of signs.

Re: Things to do in North Carolina

#10

Re: Things to do in North Carolina

Tom Sweeney - Coatesville, PA

>Hey thanks a lot guys - lots of good tips here & I'm definately adding them to the list. I've been through the general area before, but have never spent any time there & I'm really looking forward to it.

Re: Things to do in North Carolina

#11

Re: Things to do in North Carolina

Alan Bierbaum, near Denver, CO

>If you can spare the time: The Museum of Appalachia just north of Knoxville on I-75 is a great place to visit. You should be able to find them on the web. I schedule a half day there each time that I am in the area.

Alan

Re: Things to do in North Carolina

#12

Re: Cormark International, Weaverville *LINK*

Bill Turpin in WNC mountains

>Cormark is about ten miles north of Asheville outside of Weaverville. They are an exotic wood supplier to Woodcraft. Their scrap bins are wonderful treasure troves of African blackwood, purpleheart, yellowhart, etc. Usually sold for $3/lb. Lots of pen blanks, finials, and small turning stock, never know what you will find. Website will give contact info, they are in rural, country location...easy to find, but not without proper instructions. Amen to Biltmore House, lots of boards in America's only castle that are 36 to 48 inches wide! It is hard to image trees that huge. Have fun, exploring.

Bill in WNC mountains


Cormark

Re: Things to do in North Carolina

#13

Re: Things to do in North Carolina

Steve in NC

>Tom

There is a nice Transportation Museum in Spencer and the Folk Art Center is Asheville is well worth the trip. There are a number of small Galleries in the Asheville area as well.

A ride on the Blue Ridge Prkway is always fun with many pretty short hikes. Lindville Falls and Cavrans are fun.

If you are driving and have room, check out Steve Wall Lumber in Mayodan. He has a great selection of turning blocks, essecially Ambrosia Maple and Canarywood.

Enjoy your trip.

Steve

Re: Things to do in North Carolina

#14

Re: Things to do in North Carolina

John Uteck (North Carolina)

>Packards in Tryon, NC.

Carolina Mountain Woodturners meet in Ashville.