Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Finish OVER wax??

Posts

Finish OVER wax??

#1

Finish OVER wax??

Rjobert Savit

>I've been playing around with wax based agents to color the grain in open grained woods. The final suggested step for most applications seems to be a buffing with a clear paste wax. However, it seems to me that this is not a very durable finish, even for decorative objects, and in particular, the wax based coloring agents in the open grain may be subject to degradation by even casual handling. Is there any finish that can be put over the wax finish to seal it all? Krylon customer service states that none of their products will work in the application.

Thanks,

Bob Savit

Re: Finish OVER wax??

#2

Re: Finish OVER wax??

Jennifer@Indy.USA

>Bob, when I've used products like Liming wax to fill grain for contrast I find that just using an oil finish is best. But I use the oil BEFORE I use the liming wax. This way the wax that is left on the closed grain areas is easier to wipe off, and what's left is just the wax in the poors. It also helps to not yellow the liming wax if you apply the oil first. Keeps it white.

Hope this helps.

Jennifer

Re: Finish OVER wax??

#3

Re: Finish OVER wax? Sure!

Mark Mandell - Gone Round In Jersey

>About the only thing to use is a coat or two of shellac which will adhere to, and actually seal in, the applied wax. For this application I would suggest either Ultra blond (bleached) shellac or Zinsser's SealCoat which is a proprietary product that amounts to the same thing and has a 2-year shelflife. Unfortunately, neither the Ulta Blond nor the Zinsser's is water-white and colorless, so you will get a very slight tinting effect. Note also that while shellac is much more durable than wax, it's not nearly as tough as a poly or varnish. The shellac will, however, act as a barrier coat to seal in the wax and then you can topcoat over the shellac with one of the clear acrylic finishes for much more protection without adding further tint.

Hope this helps

Re: Finish OVER wax??

#4

Re: Finish OVER wax??

Russ Fairfield

>Another option. Any of the oil/varnish finishes can be used over wax. Thw original Watco works, but one of those with a varnish content will leave a protective film. I use it to remove the excess wax and that leaves a sealer coat behind. Then lightly buff with steel wool and add more coats as usual.

Re: Finish OVER wax??

#5

Re: Finish OVER wax??

Ron McKinley

>Watco and all other oil finishes contain mineral spirits which will dissolve the wax. At least, that's my experience. ......Ron