Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Delta customer care.

Posts

Delta customer care.

#1

Delta customer care.

Steve in NC

>Hi folks

I have posted a couple of times about the vibration problems with my Delta 46-715. Previously Delta replaced the motor pulley at No Charge (After it flew apart) I am now at the end of my two year wanentee and I developed a crack in the pulley on the spindle. Looks like the spindle my be bent also. Fearing the worst, I called called Delta tech support.

They were great.

They not only are sending a new spindle and pulley, the technician made sure I was getting the retaining clips and bushings I needed as well. When I mentioned that while I had it apart I was going to order bearings (I expected to pay for these) he added those at N/C as well.

While I am not happy with the problems I have had with the lathe, I cannot say enough for the positive and helpful response I have received both times from Delta Customer Support.

Re: Delta customer care.

#2

I agree

Jack Savona

>My noisy 715 has had many quality control problems, but Delta service has responded well to all my needs.

Re: Delta customer care.

#3

No quality control.

Norm Smith in Nova Scotia

>That is the problem with Delta. They do not do any quality control. The customer does it. just my 2 cents worth.

Norm

Re: Delta customer care.

#4

Re: No quality control.

Barbara Gill, Remlik VA

>I was thinking the same thing. It is good that they fix what should not have broken. I used to buy Delta years ago but quit a number of years ago because of quality. I am one of those people who, when they buy a tool, expect it to work correctly. I will say as I have before, I always found Canadian made woodworking tools/machines to be of the highest quality.

Re: Delta customer care.

#5

Poor Service and Questionable Quality

Jim Shaver Oakville, Ont.-Let's Go Oilers!

>Hi Norm,

I have owned a number of delta machines over the years (not hand power tools). They performed well and they seemed to be fine, nothing extra special. Anytime I needed service I was able to get great help at the 1-800 GO DELTA phone number. The staff in Guelph Ontario were great and comments from a variety of vendors about the service they received from Delta Canada was good too.

Things changed a few years ago when Delta was bought by B&D though. The service group in Guelph disappeared and so did the over the regional over the phone help. To me this was a market advantage they had, despite any issues you knew they would make it right quickly, this is now gone here. Vendors also told me of many new problems with support and distribution from Delta that they never had prior to B&D ownership.

All of this made me think about the last Delta machine I had in my shop, my planner. I questioned what kind of service I could expect in the future and I decided to sell it. I replaced it with a General (yeah, I know, I really wanted it anyway). Now when I look at Delta I lump it into that category in my mind of � it�s not what it used to be�. I would never consider a Delta machine again�quality is one thing, but confidence in service down the road is a key issue.

I am like Barbara, when I but something I expect it to work as described, when I have to be the "Acid Test" for a product I do not repeat that mistake and I go elsewhere. I have too many projects to complete and the sweeter path is more enjoyable!

:-)

Take care,

Jim

Re: Delta customer care.

#6

Re: Delta customer care.

Steve in NC

>I agree, it is too bad Delta, once one of the better tool makers, has taken such a turn. (I still have and use power tools that have the "Rockwell" name.

What bothers me more is that there does not seem to be much in the way of entry level lathes. I guess that with the advent of the midis one could get a good start and then upgrage but it is a huge jump from $300 to $2,500 to take the next step.

Re: Delta customer care.

#7

Re: Delta customer care.

Jim Rutten

>I had just the opposite experience with their customer care. I called and explained the the pully was vibrating and she said in a very condescending voice that maybe I needed to clean it. I said this was the first time I ever had the cowling off and it was not dirty and hadn't they heard of the same problem with this lathe (46-715) from other people she said no there had been no complaints at all. At this point she turned downright hateful and more condescending. Right before I got off the phone, totally discouraged, she asked if she could have my personal information and said no way. This lathe is no sitting at my father-in-laws, who is a machinist, who thinks he can fix it. Meanwhile, I am waiting for the person who is going to put the 220 hookup in my basement so I can get a real lathe down there. NO MORE DELTA FOR ME.

Re: Delta customer care.

#8

Re: Delta customer care.

Russ Fairfield

>The 14" Jet is an excellent entry level lathe, and it sells for $900, and less than that of you watch for the sales at Woodcraft. It is a full-sized cast iron lathe with a Reeves drive, a headstock that slides and rotates, and locks on the tool rest and tailstock that work. The only negative is the belt drive that doesn't go lower than 550 RPM, but we can have everything on a good quality lathe that sells for less than $1000.