Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

vacuum system (again)

Posts

vacuum system (again)

#1

vacuum system (again)

Claudia Hayward

>Help! In my last post I asked about sealed bearings for a vacuum system. I have read a bunch of the links online and they all refer to double sealed bearings or pump bearings etc. I have talked to several bearing specialty people locally and no one can help me as far as being able to provide me with a sealed bearing that will be airtight. I would really appreciate it if someone has made up one of the vacuum systems using one of the appropriate bearings could give me a manufacturer name and part number. (I have no access to Lowes so that won't help)

Thanks!

Re: vacuum system (again)

#2

Re: vacuum system (again)

Darryl Hansen

>Try Boca Bearing in Florida. You may not find a totally airtight bearing but they stock just about every bearing imaginable. No shipping and great people to work with. don't have their number with me but I have had them find bearings and I didn't even know what I needed.

Re: vacuum system (again)

#3

Bearings with "contact" double seals

Eddie Pacheco, San Jose, Ca.

>That's what will work for your application, Claudia. The seals contact the inner and outer race. Some double sealed bearings do not contact the inner race and will leak.

Here's a link to a bearing of that type, with an application list, and the company that distributes these has a large selection of bearings and other stuff. Look through the pages for a bearing that meets the outer or inner diameter you need.

http://www.applied.com/catalog/ma/catalog.do?e=10&s=6366371&r=0

Re: vacuum system (again)

#4

Re: vacuum system (again)

Bob Fawcett

>Al Crandall sells a kit with all the parts including bearings to make a rotary adapter. His kit uses 2 bearings.

You could post for him on this board or look up an old post of his and get his email address from that.

Re: vacuum system (again)

#5

Leo Van Der Loo

Re: vacuum system (again) *LINK*

Leo Van Der Loo

>Hi Claudia

Here's a link to MSC industrial supply, they have the double sealed and other, bearings, etc.

Have fun and take care

Leo Van Der Loo


http://www1.mscdirect.com/CGI/N2DRVSH

Re: vacuum system (again)

#6

Re: vacuum system (again)

Michael Schultz

>In the Woodturning Design Magazine issue #7 Fall 2005, has an article about building a vacuum system, seal bearings, part numbers and where to buy online. I have built one and it works fine. I hope this helps.

If I can find my issue I�ll forward the information.