Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

sanding

Posts

sanding

#1

sanding

olejon10

>can someone tell me how to make a jig or something to sand the inside bottom of goblets and boxes i always get them just a little to deep for my fingers thanks for your help

Re: sanding

#2

JL

Re: Not to be flip..

JL

>but what's wrong with a stick? You can take a reasonably heavy dowel or broomstick and attach a rotating wheel on it. Attach a piece of an old mouse pad to act as a cushion and then put on some velcro to the wheel and voila - an inexpensive sanding tool that you can stick the velcro backed sanding disks to. Alternatively you can buy one.

Re: sanding

#3

Re: sanding

RK in Milw

>Run a search here for the Acme Sand-O-Matic. It's a simple gizmo I came up with for sanding the insides of hollow vessels and undercut bowls. You should be able to adapt it for your needs.

Ron Nelson

Re: sanding

#4

Re: sanding

Gil Jones on Lake Seminole GA.

>This one is easy to make, and use.


img

Re: sanding

#5

Re: sanding

eliot

>Check out Bruce Hoover. He makes a product called , Extend-A-Sand. It's basically just a long metal rod with a keyless chuck on the end; but this rod spins inside a long cylinder that fits over the Siux -type close quarter drill, that many of us use for power sanding. You put the usual sanding mandrel in the chuck. So it's a long power sander that doesn't wobble around much when you sand deep.