Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

PSI barracuda vs the baracuda 2

Posts

PSI barracuda vs the baracuda 2

#1

PSI barracuda vs the baracuda 2

Larry Hamon

>I am looking at buyin gthe PSI baracuda, I am looking at it and thinking the baracuda is the one to buy. the baracuda 2 model is $25 more and the amount of movment of the jawa is smaller. any thoughts????

thanks

Re: PSI barracuda vs the baracuda 2

#2

Re: PSI barracuda vs the baracuda 2

Bill Grumbine (Kutztown PA)

>Larry, I do not have any personal experience with either yet, although I do have a Barracuda II on order. If I recall, the original uses the two tommy bars to operate the scroll mechanism. If that is the case, going to one handed operation is worth a lot more than $25.00 in the long run. Using the two tommy bar system, you will find that you often need three hands to get a bowl installed correctly.

Bill

Re: PSI barracuda vs the baracuda 2

#3

Re: PSI barracuda vs the baracuda 2

Ricco G

>Hi Larry

I just purchased a Barracuda 2 a few weeks ago, I am new to turning and so far it meets my needs,like Bill said with the tommy bars you need the third hand.I have been dealing with PSI for a few years now and no problems with them,I live about 40 minutes from the show room. Rick

Re: PSI barracuda vs the baracuda 2

#4

Re: PSI barracuda vs the baracuda 2

Ricco G

>Hi Larry and Bill

Not to deter you from buying the PSI chuck, when you order it get a pack of extra jaw screws I stripped one out on Fri.,they have them at the store, I've been putting it to good use this past week, will post pictures this weekend.

Ricco