Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

vacuum system

Posts

vacuum system

#1

vacuum system

Claudia Hayward

>I have been messing about building a vacuum system and have arrived at the point where I need to run the air line through my spindle. The plans I am using suggest running the line through a sealed bearing. I did this and found that I was leaking a lot of air through the bearing itself, despite the fact it is supposed to be sealed. My question is ... are there different types of sealed bearings? This one came from an auto supply.

All suggestions gratefully received. This project has been in the works for several months and I am really wanting to get this system working for me!!

Re: vacuum system

#2

Re: vacuum system

Bill Howatt

>The short answer is yes and hopefully somebody that knows more about it will now take over the real solution to your problem.

If you don't get any more help which is unlikely, go to a bearing supply store and talk to them.

Bill

Re: vacuum system

#3

Yes, there are...

Peter Teubel

>...different "sealed" bearings. What you need is a double sealed water pump bearing.

Re: vacuum system

#4

Re: vacuum system *LINK*

Russell L. Babbitt Jr.

>Check the website of the Glendale Woodturners:

http://www.woodturners.org/tech_tips/frame_1.htm

There are a number of articles on vacuum chucking with descriptions of double sealed bearings.


http://www.woodturners.org/tech_tips/frame_1.htm

Re: vacuum system

#5

Re: vacuum system

Bob Fawcett

>Al Crandall built several systems and sells a kit to make the coupler. Here is an article on how he did it with part numbers at Lowes.

http://www.woodcentral.com/bparticles/smvachuck.pdf

Re: vacuum system

#6

EZ vacuum adapter

Jorge Castaneda ~ Downeast Maine

>Claudia,

I did use the EZ adapter, (Packard, Craft supplies), it eliminated the leaks I had in my Nova, very easy to install and works great.

$0.02

Jorge

Re: vacuum system

#7

Re: vacuum system

Pete LaBelle

>Make sure you have a sealed and not shielded bearing. Gut test: Seal the outer race with your lips, plug the ID with your finger, then suck. If it leaks, it won't work for your application. Shielded bearings will not maintain a good "suck".

Re: vacuum system

#8

Thrown out of many bearing stores?

Bill Howatt

>

Re: vacuum system

#9

Re: vacuum system

Claudia Hayward

>Thanks everyone... I knew I would get an answer here! So it's off to my local plumbing store for a pump bearing (I know Lowes has a great selection of stuff but I'm north of the 49th and they don't exist here)

Re: vacuum system

#10

Hey Floyd! The bearing sucker is back!

tek-Brunswick, Ohio

>