Newbie Question - Wood
Bruce
>How is pecan and black walnut for turning? I have an opportunity to aquire a great deal of both types of wood and would like to know how it is to turn.
Thanks for your input.
Bruce
Knowledge You Can Build On — Est. 1998
Newbie Question - Wood
Bruce
>How is pecan and black walnut for turning? I have an opportunity to aquire a great deal of both types of wood and would like to know how it is to turn.
Thanks for your input.
Bruce
Re: Newbie Question - Wood
john lucas
>Both are great but the pecan is a little hard so turn it green if you can. They call it Pecancrete around here but I didn't find it that bad but then I also turn black locust, Osage Orange, and bone.
Re: Newbie Question - Wood
Jake Niedling
>Get It!! I think walnut is great to turn. The little bit of Pecan that I turned went well.
Re: Newbie Question - Wood
Carole Valentine
>Good stuff. If you are one of those people who is prone to allergies though, you might be a little careful with the walnut. I've never had any sort of allergy in my life and all of a sudden I seem to be getting adverse skin reactions to walnut dust (itching).
Re: Newbie Question - Wood
robo hippy
>I haven't had a chance to get my hands on any fresh pecan. The closest I have cone is some hickory from the lumber store. It is similar I guess. However I have turned a lot of the balck walnut, and some english/persian walnut. I now wear a dust mask when turning the black walnut, even when it is sloppy wet. If I turn for several hours without it, the smell is a bit annoying. I did cut the stump burl from an english/balck walnut graft, and felt one hand itching. The nest day, I had a lot of small blisters on that hand. I had cut fresn walnut before and since, and never had that problem. Who knows why? Black walnut seems to sell better, but always seems to sell in spurts; you don't sell any for a long while, then you can't keep it in stock. It is a little dark for a lot of people. The bigger the tree, the better, more figure, especially in the bottom of the trunk.
robo hippy
Re: Newbie Question - Wood
JL
>I love turning kiln dried walnut. It makes really nice legs and takes a really nice line. I don't know about wet stuff though. Wear masks.
As for pecan... the grain is gorgeous on the good pieces. I haven't turned it, I carved a little seat out of it. That stuff was so hard, I wore out twice the number of discs for the sanding. I had to sharpen the chainsaw disc carver twice for the small seat. It made a really nice seat though.
My dad is alergic to the dust as well
john lucas
>
Re: Newbie Question - Wood
Bob Fawcett
>I have turned a couple of limbs off the pecan tree. When it is green, it turns as easily as any other wood. These limbs have not distorted as they dry - yet. They may, but so far dryed just like it turned.
Re: Newbie Question - Wood
Ed Karch
>I am turning lots of pecan. It is my favorite both green and dryer. It is one of the most spectacular spalted woods you will see.Takes fine detail well so would also be good for spindle turning. Get all of it you can and let some spalt.
Re: Newbie Question - Wood
Bob Fawcett
>Ed,
How do you "let some spalt"? I have a stack of limb sections in the yard in the firewood rack. They just sit there in the shade. Should I just leave them there, or do something else?
Thanks
Re: Newbie Question - Wood
Ed Karch
>leave some on the ground and let summer heat and humidity do the work. Turn them over occasionally so they rot evenly. You can toss some compost on them to inocculate.