Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Powermatic Lathes *LINK*

Posts

Powermatic Lathes *LINK*

#1

Powermatic Lathes *LINK*

georgetroy

>I have created another new discussion group for Powermatic lathe owners. Thinking about purchasing a new lathe? The purpose of the group is to discuss pro & cons of your machine. Ask advice from others, discuss your projects, and post photos of your projects and machine setups. You have 30 mb of photo space all your own. Many of us own & enjoy several lathes of different brands and sizes. I'm one of them. The site is moderated and your membership must be approved.


Powermatic lathe owners

Re: Powermatic Lathes *LINK*

#2

Re: Powermatic Lathes

Rick Davenport

>Great idea George.

I have applied am awaiting your judgement.

Rick NotsoDull Davenport

Re: Powermatic Lathes *LINK*

#3

Re: Powermatic Lathes

Rick Davenport

>WooHoo!

I'm a member.

Although maybe I should consider Groucho Marx's philosophy:

"I refuse to join any club that would have me as a member."

Thanks George!

Rick

Re: Powermatic Lathes *LINK*

#4

Re: Powermatic Lathes

john lucas

>George there is also a powermatic section in the AAW site. I will try to post my latest modification in both yours and thiers. I've added indexing a different way than the other sites I've seen. I'm going to add a 2nd way shortly.

Re: Powermatic Lathes *LINK*

#5

Re: Powermatic Lathes

john lucas

>tried to join and sign in but it kept saying my password was incorrect. I'll try later but if it keeps doing that you can count me out. I hate that kind of stuff.

Re: Powermatic Lathes *LINK*

#6

Re: Powermatic Lathes

georgetroy

>John, I hate that too when it happens, These groups can be can of fickle. I will send you a personal invite, maybe that will work. Your contribution is needed, hang in there. GT

Re: Powermatic Lathes *LINK*

#7

I tried also...

Clem Wixted

>...and was told I had to pass the board of review before I would be let in. Haven't heard from them.

May not be worth the effort for the moderators or participants.

Too bad.

Clem

Re: Powermatic Lathes *LINK*

#8

Re: I tried also...you are among the first

georgetroy

>Hello Clem,

You were among the first to be signed up your name is on the member list. The site does not not send back notices if you are approved or not, it may not sure. Thanks George

Re: Powermatic Lathes *LINK*

#9

Hey John!

Kurt Rosenzweig

>Where is the AAW section? Love to check it out! I looked but I couldn't find it!

Re: Powermatic Lathes *LINK*

#10

3520 tips and techniques *LINK*

john lucas

>Kurt try this link and then go down to the 3520 tips and techniques.


http://www.woodturner.org/vbforum/forumdisplay.php?f=4

Re: Powermatic Lathes *LINK*

#11

I think I'm on thanks george

john lucas

>

Re: Powermatic Lathes *LINK*

#12

Re: Powermatic Lathes

Jerry Hall

>I too find it impossible to join. I did successfully get my Net Passport, but when I try to post a message it asks me to join, and then says the web page is not available after I complete the form and click continue. I have found MSN Groups to be a bit of a PITA in the past. Too much control. Very MicroSoftish. There won't be much participation if this is the case and this group will die aborning. Maybe Yahoo Groups would be more straightforward.

Re: Powermatic Lathes *LINK*

#13

Re: Powermatic Lathes

eliot

>I SIGNED UP, BUT WHEN IT CAME TIME TO POST A MESSAGE, I WAS ASKED FOR MY BIRTH YEAR, WHICH I REPEATEDLY GAVE (1939). BUT THE SCREEN KEPT COMING BACK WITH THE MESSAGE THAT THE YEAR HAD TO BE BETWEEN 1800-SOMETHING AND 2006. I BELIEVE 1939 SATISFIES THIS INEQUALITY.

Re: Powermatic Lathes *LINK*

#14

Re: Powermatic Lathes-Jerry

georgetroy

>Hi Jerry,

Yes MSN can be a Pita. So is Yahoo. It is necessary to exert some amount of control because of the spammers. Certainly Yahoo and MSN Groups do not lack for ads on the screen. Goggle is no different. Yahoo makes you sign in too often, they don't have enough photo space and they don't give you much of a screen so you can see the photos. I will send you a personal invite sometimes that helps. It can be frustrating. GT

Re: Powermatic Lathes *LINK*

#15

Re: Powermatic Lathes

Stuart Johnson

>I won't even try MSN groups anymore. There is just too much available to spend any time fussing with access.

Re: Powermatic Lathes *LINK*

#16

Re: Powermatic Lathes-Stuart

georgetroy

>I know the feeling Stuart, I have had troubles accessing groups on MSN also as will as Yahoo and Goggle. I just keep being persistance. Dog gone computers and barriers spoiling our fun. GT

Re: Powermatic Lathes *LINK*

#17

Re: Powermatic Lathes-Elliot

georgetroy

>Hello Elliot

I don't why these groups like MSN ask for your age year mine is 1937. I wish groups like MSN, Woodcentral, Yahoo and so on were avaiable 25 years when I started turning. I will say turning is easier than golf, not much memory retention there. Hang in there. At times startup attempts are tough. GT

Re: Powermatic Lathes *LINK*

#18

failed to post

John Lucas

>George I thought I filled everything out correctly and it sent me an e-mail saying I had but when I try to post a message it says this is a members only area.

Re: Powermatic Lathes *LINK*

#19

Re: failed to post

georgetroy

>Hi John,

As my wife says nothing works right. I made some changes try again please. We will get this all shook out. GT

Re: Powermatic Lathes *LINK*

#20

Re: I tried also...you are among the first

eliot

>Thanks George Troy for a response. I keep trying, but the system doesn't seem to understand that my birth year, 1939, is in the correct range. I'm beginning to think that this process is in the "too hard" category.

Re: Powermatic Lathes *LINK*

#21

Re: I tried also...you are among the first

georgetroy

>Tell them stories and see what happens, what in the heck do they know. GT