Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OK; All of you Saturday night Cone-Heads

Posts

OK; All of you Saturday night Cone-Heads

#1

OK; All of you Saturday night Cone-Heads

Keith Newton

>A CONE-ELLIPSE COFFEE TABLE

You need a table to set your beverage-units on. I ran across a 2,25" transparency the other day that I didn't have scanned, so I just stood it up on a rail of the shoji, and shot it in macro, so you can see the fiber texture coming through.

I made this piece back in 1993, and turned it on a PM 45 faceplate outboard. I had a conveyer gear-motor with a chain driving a big sprocket on an inboard faceplate. I got it down to about 1 rpm. I had the tail-stock clamped in a vice on a sturdy bench, and jury-rigged a full-length tool-rest that I kept the outfeed bed of my makita 6" power-plane riding on as I worked my way across.

This is when the fun started. The wood is QS Wenge. The wedges were milled with a 3/4" half-round on one edge, and a 3/4" flute milled in the other, so the parts automatically fit tight without worrying about a miter angle. I use thicken epoxy with something to blacken it to adhere the wedges.

I made it up in three parts of 120* arcs. with an over-all 30* angle to the cone. It is about 40" tall. The 3/4" beveled edge glass top is an ellipse.

Funny story.. The lady I was dating back then heard me refer to it as cone ellipse coffee table, She told me later after seeing it that she thought I was saying Coney Lips.. Like the mouth of a chicken. I liked it so much, I almost changed the name. I say anything you can do to put a smile on your pecker is good, Hun-!!


img

Re: OK; All of you Saturday night Cone-Heads

#2

Another shot of the above work.

Keith Newton

>This is how it looks closed.


img

Re: OK; All of you Saturday night Cone-Heads

#3

Inspiring...

Jorge Castaneda ~ Downeast Maine

>Keith,

that is quite a fine piece, from the planning to execution.

thanks for sharing,

Jorge

Re: OK; All of you Saturday night Cone-Heads

#4

Re: Another shot of the above work.

john lucas

>Absolutely wonderful. I love the concept and the execution looks good also. By the way I tape transparencies to my front door window with a piece of white cardboard about 3 feet away on the front porch. I can shoot these in the cloudy setting and get almost perfect color. Camera on tripod of course.

Re: OK; All of you Saturday night Cone-Heads

#5

Thanks Jorge, and John

Keith Newton

>John, I know I can do better a the photography than I did here. I had just gotten my Canon S2 IS, which I love, and this fell out of something onto the floor, and i just set it up there to see what I would get.

Since I don't have a slide-scanner, yet have about 30 years-worth of slides that I would like to have in my computer photo library, I am thinking about setting up some sort of fixture that i can quickly insert the slides in with a good light-source. This camera has a super-macro which allows it to focus right up to the touching the lens.

Re: OK; All of you Saturday night Cone-Heads

#6

Re: Thanks Jorge, and John

john lucas

>I have been toying with the same thing. A good scanner is out of my range and even though I plan on keeping my slides I would like to archive them just in case. Especially my 4x5's since I've sold that camera and can never reproduce those shots.

Re: OK; All of you Saturday night Cone-Heads

#7

Re: Thanks Jorge, and John

don in central illinois

>Look at Shutterbug magazine and look for 'slide duplicator'. You can use whatever light source you want, ie. incandescent or flash. Get one that fit's your particular camera or an adaptor. If you are using a digital camera, you'll have them electronically. If using a film camera, take them to Wally world and have them burn a CD.