Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

another minwax tung oil question

Posts

another minwax tung oil question

#1

another minwax tung oil question

ken chase

>Is it a good or bad idea to coat my entire piece with CA glue before using the tung oil? I did not do so on two other pieces and I'm up to five coats on them and so far the result looks really good. I plan at least two more coats. I have been letting the pieces dry two days between coats. I don't know how many coats is too much.

Advice appreciated.

Re: another minwax tung oil question

#2

Re: another minwax tung oil question

Dave Belser

>I'm not an expert on this sort of thing, but my experience with items that I've finished with CA is that it seals the wood so thourghly that the tung oil after would be a useless mess.

CA gives you a strong acrylic (plastic?) surface on the item that can be buffed to a very high sheen.

- Dave

Re: another minwax tung oil question

#3

Relatively new to this

Thad Parker

>I realize that I may be the only one who doesn't know, but I won't ever know unless I ask: What is "CA glue"? I think I remember reading it being used to "help with" checking or cracking, but what is it exactly?

Re: another minwax tung oil question

#4

Re: Relatively new to this

Carole Valentine

>Thad, it's the common name for cyanoacrylate. Basically crazy glue except the brands we use in turning are propably better. It comes in all sorts of formulations: thin, medium, thick, flexible, Black, etc.

Re: another minwax tung oil question

#5

Re: another minwax tung oil question

Carole Valentine

>Ken,

I don't know why you would want to do that in the first place? You would get zero oil penetration and no one will ever convince me that a CA finish won't crack and peel over time. I avoid CA like the plaque if I can (only use it for cracks.) If I think I want a sealer to keep oil from changing the color of the wood too much, I use a quick wash of very thin lacquer (50 - 75% thinner) which I wipe on quickly and immediately wipe dry.

Re: another minwax tung oil question

#6

Re: another minwax tung oil question

georgetroy

>Hello Ken,

Not to take anything away from your CA finishing. Tom Woodbury does this also. But I would stick to traditional finishes like prime coat of lacquer followed by Waterlox like Carole does. Mini Wax Tung Oil has a strong odor to me. Some of the Urthane Oils does not. There is no short cuts in finishing. It would be nice to slurp on one coat and be done with it. You do have a certain amount of danger in using total CA coverage. This is all my opinion. I also quit using Watco many years ago. GT

Re: another minwax tung oil question

#7

Re: followup minwax tung oil question

ken chase

>Thanks all. One more question. I used CA mixed with sawdust to fill a large crack. Will this area present a problem when I apply the minwax tung oil? Thanks

Re: another minwax tung oil question

#8

Keith Tompkins

Re: another minwax tung oil question

Keith Tompkins

>Hi Ken, personally, I don't like sanding sealer or ca under an oil finish. Maybe a bias of some kind, but it seems like taking shortcuts to me.

The minwax is not a pure tung oil finish...I believe it's a poly/oil mix. It dries very quickly,a new coat can be applied daily. Sand between coats, a dry finish will create white powder when sanded. I use 600 wet or dry paper for this. If you don't sand between coats, it will be difficult to achieve a professional finish, as each flaw in the previous coat will show through the next.

Re: another minwax tung oil question

#9

Re: followup minwax tung oil question

adrien

>That's one of the reasons people make the patch contrasting, (inlace, charcoal, coffee, etc.) The difference in finish (CA glue will be shiny until sanded) isn't as obvious and the "bug" becomes a "feature"

Re: another minwax tung oil question

#10

Re: another minwax tung oil question

Bill Crommett

>Ken: I have used CA a few times, and it gives a nice semigloss finish on eastern red cedar. It is not easy, but with practice I have been able to do a respectable job. I have never tried to put anything else on top of the CA.

Bill

Re: another minwax tung oil question

#11

Re: another minwax tung oil question

keith zimmerman, Normal IL

>ken, as others have stated, I avoid using CA except to make repairs. In my experience, CA must be sanded thoroughly to open the pores of the wood so the minwax tung oil finish can penetrate.

keith

Re: another minwax tung oil question

#12

Re: Relatively new to this

Chip in Plano

>I've never seen CA in Black. Got a source? I've looked all the usual online retailers and not seen it.

Re: another minwax tung oil question

#13

Re: Relatively new to this *LINK*

George Van in WI

>You can look here Chip, I have had good service from them.


Starbond