Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Collection plates

Posts

Collection plates

#1

Collection plates

Ed Moore

>I made fifteen collection plates for our new church sanctuary. All will be used for the first time this Sunday.

The plates are made from solid 12/4 mahogany. They are 13 1/4" in diameter and are 2 3/8" high.

The first picture shows eight of them stacked.


img

Re: Collection plates

#2

Re: Collection plates

Ed Moore

>Here is a single plate.


img

Re: Collection plates

#3

Re: Collection plates

Jennifer@Indy.USA

>Ed, these are lovely! How did you line them?

Jen

Re: Collection plates

#4

Re: Collection plates

Don in Central Illinois

>Those are great. After my pastor found I started turning, he has hinted several times about replacing ours. I wish we were a large enough church to need eight. Sometimes one is too many. I do like the love the ones you've done.

Re: Collection plates

#5

Centering the fabric

Ed Moore

>Hi Jen,

The fabric selected was a suede cloth with white background. To cut the disks I put double faced tape on a disk of MDF in a chuck and put an oversized piece of fabric on the disk. I put a piece of masking tape on the fabric and took a ballpoint pen and marked the center. I marked a center point and a radius point on my tool rest and aligned the center points and I took my handy 1/4" round skew and cut the fabric at the radius mark. I took a brown Sharpie magic marker and colored the edge of the back of each disk of fabric so the white wouldn't show on the edge.

Next, stick a pin through the center point of the fabric, lay it face down, and spray the underside with 3M Super 77 spray adhesive. I had marked the center on the bottom of the plate before it was removed from the lathe. So I put the pin at the center point and slid the fabric down the pin so that the centers were aligned perfectly. Then I allowed the fabric to fall in place a little at a time and smoothed it out. I removed the masking tape and let the adhesive dry, making very sure to smooth the fabric again and especially at the edges.

Re: Collection plates

#6

Re: Collection plates

Ed Moore

>Don,

I only took a picture of eight of the FIFTEEN. After much thought and a little discussion, my wife and I decided to donate them.

After completing the finishing, but before putting the fabric in place I took a little forced time out, and while riding in the ambulance I said a little prayer, "Lord, you know I would like to finish those plates." That evening I had two stents put in, and two days later I was shifted from CCU to Progessive Care and told to walk. I walked three miles that day in the hospital. I went home the next day and was able to work in my shop and install the fabric. God is Good. The following day they were delivered to the church. And now I feel great from several perspectives. ;^D

Ed

Re: Collection plates

#7

Keith Tompkins

Re: Collection plates

Keith Tompkins

>These are great, Ed. Your work is very precise. Glad you are doing better,too!

Re: Collection plates

#8

Re: Collection plates

Jerry Whitaker

>Ed, those are great. I won't mention any name here but I do know a guy who made some collection plates for his church to the specification that they wanted (free of charge). Unpon delivery, he was told that they were too small. His reply: "Cut a hole in them and hang a Walmart bag under them". I think he had made 8 of them to their exact specs. That is a lot of work and then to get slammed like that.... I think he had a good come back.

Re: Collection plates

#9

Re: Centering the fabric

Jennifer@Indy.USA

>Ed all the hard work paid off. They look great. What a fine donation to your church.

Thanks for explaining your method.

Jen

Re: Collection plates

#10

Re: Collection plates

Ed Moore

>Jerry,

I went to considerable effort to work with the person (assistant pastor)in charge of the plates. While I was given complete freedom as far as the style was concerned, I have long had negative thoughts about plates that don't stack nicely. I completed two plates except for the fabric and showed them to two of the pastors before I touched the remaining blanks. When I went forward with the rest of them I already had total support.

Ed

Re: Collection plates

#11

Re: Collection plates

Bruce in Saint John, N.B. Canada

>Ed those are beautiful, and will no doubt see lots of use for many years. It must be nice to be a member a church that require that many plates, for years we used four plates and now we are down to two. I hate the thought of it but I can see the day coming when we will only require one. Glad to hear you are on the mend, isn't it wonderful what they can do in the Heart Centers. I have one stent and four by-passes, certainly makes one thankful and gives one a different outlook on life doesn't it.

Re: Collection plates

#12

Thank you, Bruce.

Ed Moore

>Bruce, I thank you for the kind words. Just prior to my "time-out" a younger neighbor had a heart attack and a double bypass and a fellow turner had 6 blockages that required a quadruple bypass. What was so strange was that the turner kept his weight down, was scrupulous about his diet, and his parents died in their mid-nineties.

My father had bypass surgery twice and half his siblings had the same surgery by the same doctor, so I have known that genetics are not on my side here. Having started a month ago, I have lost 20 pounds by cutting out sweets, sodas, and after-eight snacks, and by eating less. At this point I feel great. One of my main focusses now is avoiding bypass surgery. Hopefully the new stents which are medicated can help there.

Ed

Re: Collection plates

#13

Re: Collection plates

Mike Brazeau

>Ed - those are wonderful plates. Excellent choice of wood, design and execution. As others have said, what a joy to be a member of a congregation that needs eight plates. Good luck in your recovery and I look forward to meeting you at the AAW.

Mike

Re: Collection plates

#14

Fifteen plates

Ed Moore

>Hi Mike,

Actually I made fifteen plates because we need at least twelve. And it is a pleasure to be part of a growing church. Our first service in the new sanctuary is on Sunday and I expect it to be charged with emotion.

And I feel the best I have in years, thanks.

Ed

Re: Collection plates

#15

Re: Collection plates

Pete in Holland, MI

>Impressive. I love turning bowls, but making 2 the same, let alone 15, had to be a challenge in production dicipline and not creativity.

My hat's off to you !

Pete