Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Boy And His Tops

Posts

Boy And His Tops

#1

Brad Vietje

Boy And His Tops

Brad Vietje

>A.K.A. Man With Dangerous Tools !

Here are a few tops and my new/used Nova Comet mini lathe. This weekend I have an event turning and demonstrating tops of many sorts with kids at a local main street festival. I will have ancient-styled twirlers from pre-Helenic times, peg tops, whip tops (also pre-date the Greeks), throw tops, and a number of "thump tops" or modern-day twirlers of many designs, including my own "Acorn Top", and even a few Saturn spinners. All are shown here except the larger whip tops, though a small whip top is shown at far left. The big fella is really just for show -- it is much harder to spin than the little ones !

Safe spinning,

Brad Vietje

Newbury, VT


img

Re: Boy And His Tops

#2

Re: Boy And His Tops

Gil Jones on Lake Seminole GA.

>Hey Brad, nice work on the tops!!

I like that acorn top.

Re: Boy And His Tops

#3

Re: Boy And His Tops

Bob Fawcett

>Hi Brad,

Thanks for the picture.

I had a lot of fun the other day making a few of what I think you are calling "thumb tops". So far I find that the ones with a lower center of gravity spin the longest, at least for me.

What are "whip tops" and "throw tops"?

What are the larger ones on the left side of the picture?

Thanks

Re: Boy And His Tops

#4

Re: Boy And His Tops

Wayne Leach-NW Ontario

>Pretty neat tops and lots of fine turning work, I am not in this league yet?

I never knew there was a Comet lathe but it looks pretty substantial?

REgards,

Wayne

Re: Boy And His Tops

#5

Re: Boy And His Tops

john lucas

>Brad great tops. By the way I have had a Nova Comet for close to 10 years now. I love it. I cut a hole in the bottom of the lathe and mounted my motor below. I also added a short gap bed extension and then filled in the gap so my mini lathe has about 24" between centers.

Re: Boy And His Tops

#6

Keith Tompkins

Re: Boy And His Tops

Keith Tompkins

>Great work...sounds like a fun time!

Re: Boy And His Tops

#7

Re: Boy And His Tops ?

Terry Quiram, Roanoke Illinois

>Brad

I also turn a lot of tops. The acorn top is my favorite. Last year our turning club made $1400 for a charity donation from the sale of tops. Its a real fun way to spend time at the lathe. I would like to see a closer pic of the "whip top".

Tery

Re: Boy And His Tops

#8

Re: Boy And His Tops

MFoster

>Hi Brad,

Looks like you're havig way too much fun. Did you get the lathe just for such demo's? Where the event?

Re: Boy And His Tops

#9

Brad Vietje

Re: Boy And His Tops

Brad Vietje

>Hi Bob,

Whip tops are an ancient variety that you start spinning by hand, then you can keep them spinning indefinitely by repeatedly whipping them with a strap of some sort. The usual whip is a piece or two of leather strap, like leather boot laces, attached to a stick. They are ususally conical or sometimes a little taller in profile, and shaped sort of like a "T". The top at far left is a small whip top modeled after a child's toy pictured on Greek pottery. They were sometimes made much larger, say up to 10 - 12" diameter, and were made of clay, as well as carved, andpossibly turned wood.

Whip tops were used by all ages in ancient Greece, and teams of adults were believed to have competed to keep them spinning the longest, and to complete a marked course as a race. Native Americans also used a form of whip tops on frozen lakes as a sport among young men -- again with much larger versions. I don't know what their tops were made of.

The other ones at the left are peg tops -- basically whip tops of a different shape, that were popular in Colonial America, and were definately turned from wood. These were shaped like another top of Ancient Greece that had a shape like a very short pencil -- a pointed end on a short barrel -- and were made of fired clay with a wooden handle insert. The handle is rubbed between both hands to get them going. I have a few, but haven't found them yet.

Throw tops are the ones that you wind a string around and toss to the ground, unwinding the string and spinning the top. They are often thrown upside-down, and invert as they come off the string. There's only one small one, not well shown in the photo, laying on its side, with a brass tip. I have a box of them somewhere, and will turn a few more this week.

You're absolutely correct -- low and wide spins better than the taller, more top-heavy forms, but some of the tallish whip tops do surprisingly well with additional energy from the lashing. I don't think the names are really set in stone; I usually call the little fellas "finger tops" or "thumb tops" that we spin between finger and thumb.

Love to make 'em -- hope you do too.

Safe spinning,

Brad Vietje

Newbury, VT


img

Re: Boy And His Tops

#10

Brad Vietje

Re: Boy And His Tops

Brad Vietje

>Thanks, Wayne.

The Nova Comet is the older style mini from Teknatool, which has been replaced with the variable speed Mercury. Nicely made little machine.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Boy And His Tops

#11

Brad Vietje

Re: Boy And His Tops ?

Brad Vietje

>When I dig out the box of tops, and/or make a few new ones, I'll post a photo of the whip top. For now, I cam post a close-up of the acorn tops I make, with a chattered cap to look like scales. The one pictured is actually a little tallish and top-heavy. Spins well, but they are easier to spin if the "nut" is a little shorter. I'd like to see the ones you make, too !

Safe spinnning,

Brad Vietje

Newbury, VT


img

Re: Boy And His Tops

#12

Brad Vietje

Re: Boy And His Tops

Brad Vietje

>Hi Mike,

I was keeping an eye open for a nice little lathe for craft shows and demos, and had planned to get the General Maxi, which I like. Then one day a stork came by and brought me a used Comet, and the family had a new little baby... Still needs a little restoration work.

Bradford is holding a downtown festival Saturday to try to promote businesses in the village. If you care to travel up this way, let me know -- we could always turn a chunk on the Powermatic after the event, too. I think it goes from 10-2 or something like that.

Take Care,

Brad

Re: Boy And His Tops

#13

Re: Boy And His Tops

Bob Fawcett

>I am having fun turning the tops, and since my grandaughter loves to watch them spin, thats a big plus.

I turned finger spinners or thumb tops, then I looked up the classic throw top shape on the net and made one of those. I bought some string Monday, but I haven't tried to throw the top yet.

The whip tops look interesting. I'll have to see what else I can find on the subject. I have a bull whip I made, maybe I could try that.

Thanks for the info and photos.

Re: Boy And His Tops

#14

Re: Boy And His Tops ?

Jennifer@Indy.USA

>Brad, this one is adorable! I love it :)

Jen