Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Supernova adapter

Posts

Supernova adapter

#1

Supernova adapter

Guy

>Hello folks, Just out of curiosity does anyone know if Teknatool makes an adapter for the old Supernova chucks so they can use the new style tightener (hex key type). Been looking around for another 1 or 2 Supernovas and nobody really any old stock left around and I don't want to reach for two different handle types (I'm pretty simple in my old age). Also, does anyone know where there are any reasonably priced cast iron or steel faceplates ( 1 1/4 x 8) in 3 or 4 inch size? Thanks a bunch and take it easy, Guy

Re: Supernova adapter

#2

Re: Supernova adapter

Barry Irby

>I have several of those chucks and do not know if an adapter is available.

I went to a local scrap yard and bought nuts that fit the shaft on my lathe and some metal disks they call blind plates. About a dollar each, two bucks for the pair. Had a machinist weld them up and true them for about five bucks per face plate. Seven four inch face plates for less than fifty bucks.

There is someone selling similar ones on line. Try a Google search.

Re: Supernova adapter

#3

Re: Supernova adapter

Darryl Hansen

>This guy makes an excellent faceplate. Don't think he can make a 3" for Nova Seahorsecustfab@aol.com Bill Kuhlemeier

web members.aol.com/seahorsecustfab