Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

first demo

Posts

first demo

#1

first demo

john lucas

>Jake brought up an interesting topic below so I thought I'd start another that might help the first time demonstrators. I still remember my first demo. Why they asked me to demo I don't know. We had John Jordan and 2 future AAW presidents in our club plus several other professional turners. They must have been at the bottom of the barrel and scraped me up. Any way I was asked to turn a bowl. So dummy me picks a mostly dry hunk of Walnut. My tools weren't the sharpest in those days because we sharpened by hand (which I still think is good to learn) and I was still kinda new and my gouges varied in sharpness from each different trip to the grinder.

Anyway it went well but very slow because you can't hog off wood with a dull tool in dry wood. Keeping the time constraints in mind I made a really thick walled bowl but did manage to show the process and all the different cuts.

Looking back I think they picked me for several reasons. One was to groom a new demonstrator. The older members can't do all the work and need to train new people. Two, sometimes beginners need to see a beginner, someone who fumbles a little and doesn't make it look so darn easy like the pro's do. Three, you need to make everyone in the club feel special or useful. Letting them do a demo really promotes a good feeling about how they helped the club and will make them more likely to do more for the club.

Charles Alvis was our club president back then and was always good at finding the potential in people. He did a great Job as AAW president as well.

Re: first demo

#2

Re: first demo

Allen Neighbors

>John, thanks for posting this. I value your input on this forum, and this is special, because it reminds us that all pros had to start somewhere. Though I can't imagine that I'll ever be good enough at turning to be asked to give a demonstration, it's a comforting thought to know someone else has been there and done that.

On second thought... I could very ably demonstrate how some cuts should not be done. :o)

Allen

Re: first demo

#3

Re: first demo

john lucas

>Allen YOu have to remember that there will always be some really new beginners in the group and they need instruction also. You may do things a little different that someone else or may explain it differently and that my be the ticket to get that technique across to the newbie.

I know in our club we have to back up sometimes and do some really basic demos. We get carried away with trying to do demos that the old timers will find interesting so we don't lose them but by doing that it's easy to lose the newbie's. I try to start each demo covering the basics of cutting with each tool, even if I'm doing an advanced technique.

Re: first demo

#4

Re: first demo

Russell L. Babbitt Jr.

>What everyone else says if right. I am scheduled for my third demo at the end of the month. My first was pens when I was still a newbie. I enjoyed doing pens and was the only one in our small group doing them, I was the "expert". My latest topic is surface enhancement. One reason I was chosen was I seem to have a rather large assortment of decorating tools and techniques in my bag. I am also willing to help others and share my ideas. One of the biggest talents a demonstrator has is the willingness to share. That is what I find really great about most woodturners is their willingness to share. Our small group is now up to about 60 members. Not bad considering that years ago we wondered if we could just keep the group together with about 6 members.

Re: first demo

#5

Re: first demo *LINK*

Ken Grunke from SW WI

>Very nice story, John--thanks for sharing it!

When I do a demo for our club, I always end up showing at some point, usually unintentionally, how NOT to do something, so others can learn from my mistakes.

For my first demo back in Aug. 2001, I showed the group how to carefully guage wall thickness with your fingers, so you can magically make the outside smaller than the inside:


My first club demo

Re: first demo

#6

Re: first demo

robo hippy

>My first demos were in front of the local Woodcraft store on 'sale' days. They would set up a lathe for me, I would bring bowl stock, tools and grinder, and turn for 6 to 8 hours. I learned to organize my presentations by the questions that people would ask. I now do demos with the McNaughton, Oneway, and Woodcut coring systems. I requested it (McNaughton) for a club demo because I couldn't make it work. That demo inspired me to try some more. I love to teach as much as I love to turn. Doing a demo makes you think about what, why, and how you do things, when so often you turn without thinking about it.

robo hippy

Re: first demo

#7

Brad Vietje

Re: first demo

Brad Vietje

>Good Points, John,

I learned a good lesson when I saw Angelo Iafrate do a demonstration a few years ago. He was wise to remember that not everyone could see what he was doing very well, especially doing his small turnings from exotic nuts. The mini-cameras so many people use now do help a lot, but its still a good policy to assume your audience can't see your tool in action as well as you'd like. Thus, he described each step he took in detail. He also detailed exactly how he was making each cut, and how he was raising the handle, rubbing the bevel, etc. I could tell that the beginners in the room felt very comfortable that they could go home and try these methods on their own equipment. A good lesson for us all to remember.

Safe spinning,

Brad Vietje

Newbury, VT