Dust Collection for Demo?
Keith I - East Tn
>Hi Folks,
LOML asked me to set up a small booth at a local fund raiser and wanted me to demo while there. It will be indoors, so should I worry about dust collection?
Turn two,
Keith
Knowledge You Can Build On — Est. 1998
Dust Collection for Demo?
Keith I - East Tn
>Hi Folks,
LOML asked me to set up a small booth at a local fund raiser and wanted me to demo while there. It will be indoors, so should I worry about dust collection?
Turn two,
Keith
Re: Dust Collection for Demo?
Donna Banfield
>Hi Keith
You should worry about dust collection - and by that I mean, try to demo something that won't require sanding. Like tops, mushrooms, small items that can be turned in a matter of minutes.
Think about it - as woodturners many of us hate sanding, so imagine how boring it must be to WATCH it being done. You'll have a lot more fun and generate more interest in the turning demonstration if it's something that can be completed in a few minutes. That's about the attention span of most people anyway.
Re: Dust Collection for Demo?
john lucas
>I agree with Donna. I never sand when doing demos unless the sanding technique is being taught. It's boring to watch and messy. I also take a broom and dustpan to clean up after myself if necessary. I want to be invited back.
No Sanding
Brad Vietje
>I'm with Donna and John --no sanding. You could set off someone's allergies, and I agree with the comments about the exciting nature of sanding...
With real sharp tools you should work on the cleanest cuts you can make, and for small items like tops, you can burnish them with the bevel, or with a small piece of wooden dowel. I sometimes bring little pieces of Cocobolo or Lignum Vitae, and you can get burnishing and coloration, too. For tops, a chatter tool and a few colored markers or pencils can bring great grins of delight to the faces of kids of all ages.
For bowls and such, one option is to rough turn a few small bowls in fresh cut green wood (more fun, tools stay sharp, no dust, and great long ribbons of linguini streaming over your shoulder !), and then have a warped, air-dried bowl or two for comparison and finish turning. You can always explain that you'll need to take these home and sand them but were concerned about the dust.
Safe spinning & have fun,
Brad Vietje
Newbury, VT
Re: No Sanding
robo hippy
>You could wet sand.
robo hippy
Excellent Point
Brad Vietje
>Excellent point. Many turners don't wet sand at all, so it would benefit both turners and non-turners alike.
Safe spinning,
Brad Vietje
Newbury, VT
Re: Demo pieces should be ....
JamieDonaldson
>... considered as expendable practice pieces, and I usually hand them unfinished to a young member of the audience!